All posts by Bryan Swopes

About Bryan Swopes

Bryan R. Swopes grew up in Southern California in the 1950s–60s, near the center of America's aerospace industry. He has had a life-long interest in aviation and space flight. Bryan is a retired commercial helicopter pilot and flight instructor.

Albert Scott Crossfield, Jr. (2 October 1921–19 April 2006)

Albert Scott Crossfield, aeronautical engineer and test pilot, 1921–2006. (Jet Pilot Overseas)
Albert Scott Crossfield, Jr., Aeronautical Engineer and Test Pilot, 1921–2006. (Jet Pilot Overseas)

Albert Scott Crossfield, Jr., was born at Berkeley, California, 2 October 1921, the second of three children of Albert Scott Crossfield and Lucia Dwyer Scott Crossfield. (“Scott Crossfield” is the family name, going back for many generations.) His father was a chemist who was the superintendent of the Union Oil Refinery in Wilmington, California. At the age of 5 years, the younger Scott Crossfield contracted pneumonia. He was comatose for a time and not expected to survive. When he finally began to recover, he was confined to bed for many months. The effects of this illness lasted throughout his childhood.

It was during this time that he developed his interest in aviation. He learned to draw, studied airplanes, and built scale models. Charles F. (“Carl”) Lienesch, who was a pilot for the Union Oil Company, gave Scotty his first ride aboard an airplane at age 6. As a teenager, he took flight lessons in an Inland Sportster at the Wilmington Airport.

Inland R400 Sportster NC267N, circa 1939. (William T. Larkins)

After his family bought a farm in Oregon, Scott Crossfield continued flight lessons and soloed a Curtis Robin at the age of 15. He earned his private pilot certificate at 18. After graduating from high school, “Scotty” helped his father with the family farm before attending the University of Washington as a student of aeronautical engineering. He took a job at Boeing to pay his tuition and support.

Ensign A. S. Crossfield, Jr.

After America’s entry into World War II, Scott Crossfield enlisted in the U.S. Army Air Corps as an aviation cadet, but because of expected delays in training, quickly transferred to the U.S. Navy. He enlisted as a Seaman 2/c in the Navy’s V-5 Program at the Naval Reserve Aviation Base, Seattle, Washington, on 21 February 1942. He began Primary Flight Training there, 7 May 1942. Scotty completed military flight training and was commissioned an Ensign, United States Navy, in December 1942.

On 21 April 1943, Ensign Albert Scott Crossfield, U.S. Navy, married Miss Alice Virginia Knoph at Corpus Christi, Texas.

Promoted to lieutenant (junior grade) with date of precedence 21 March 1944.

During World War II, Scott Crossfield served as a fighter pilot, flight and gunnery instructor, flying the Chance Vought F4U Corsair and Grumman F6F Hellcat. Though he was assigned to Fighting Squadron FIFTY-ONE (VF-51) aboard the Independence-class light aircraft carrier USS Langley (CVL-27), he did not serve in combat. He was promoted to the rank of lieutenant 1 August 1945. Scotty was released from active duty 31 December 1945. After the war he joined a Naval Reserve squadron and flew the Goodyear Aircraft Co. FG-1D Corsair at NAS Sand Point, Washington.

A Goodyear FG-1D Corsair, Bu. No. 92150, unfolding its wings at NAS Sand Point, circa late 1940s. The orange band around the fuselage shows that this airplane is assigned to a Naval Reserve squadron. (U.S. Navy)

During this time he resumed his education at the University of Washington and graduated with a bachelor’s degree in aeronautical engineering in 1949, and a master’s degree in 1950. As a graduate student he was the operator of the university’s Kirsten Aeronautical Laboratory wind tunnel.

The NACA High Speed Flight Station, 24 August 1954. The Boeing P2B-1S Superfortress is parked at the northeast corner of the ramp. (NASA)

In 1950 Scott Crossfield joined the National Advisory Committee for Aeronautics (NACA, the predecessor of NASA) as an Aeronautical Research Pilot at the NACA High Speed Flight Station, Edwards Air Force Base, California. He flew many high-performance jet aircraft like the North American Aviation F-100 Super Sabre, and experimental airplanes such as the Convair XF-92, Douglas X-3, Bell X-4 and X-5. He also flew the research rocket planes, making 10 rocket flights in the Bell X-1 and 77 in the Douglas D-558-II Skyrocket.

Douglas D-558-2 Bu. No. 37974 dropped from Boeing P2B-S1 Superfortress 84029, 1 January 1956. (NASA)
Douglas D-558-2 Skyrocket, Bu. No. 37974, is dropped from Boeing P2B-S1 Superfortress, Bu. No. 84029, 1 January 1956. (NASA)

On 20 November 1953, Scott Crossfield became the first pilot to fly faster than twice the speed of sound (Mach 2). The D-558-II was carried aloft by a Boeing P2B-1S Superfortress drop ship (a four-engine B-29 long range heavy bomber which had been transferred from the U.S. Air Force to the Navy, then heavily modified by Douglas) to 32,000 feet (9,754 meters) and then released. Scotty fired the LR8 rocket engine and climbed to 72,000 feet (21,945 meters). He put the Skyrocket into a shallow dive and, still accelerating, passed Mach 2 at 62,000 feet (18,898 meters). After the rocket engine’s fuel was expended, he flew the rocketplane to a glide landing on Rogers Dry Lake.

In 1955 Crossfield left NACA and joined North American Aviation, Inc., as Chief Engineering Test Pilot. He planned and participated in the design and operation of the X-15 hypersonic research rocketplane for the Air Force and NASA. He also worked closely with the David Clark Co., in the development of the project’s full-pressure suits.

Scott Crossfield testing an experimental David Clark Co. XMC-2 full-pressure suit in a thermal chamber at Wright Field. (Ralph Morse, LIFE Magazine/National Archives College Park Collection)

Milton O. Thompson, another X-15 test pilot, wrote in At the Edge of Space,

“. . . he was intimately involved in the design of the aircraft and contributed immensely to the success of the design, as a result of his extensive rocket airplane experience. . . Scott was responsible for a number of other excellent operational and safety features built into the aircraft. Thus, one might give Scott credit for much of the success of the flight program. . . .”

At the Edge of Space, by Milton O. Thompson, Smithsonian Institution Press, Washington and New York, 1992, at Page 3

Scott Crossfield, NAA Chief Engineering Test Pilot; Edmond Ross Cokeley, NAA Director of Flight Test;  and Charles H. Feltz, NAA Chief Engineer, with an X-15 hypersonic research rocketplane. (North American Aviation via Jet Pilot Overseas)

In 1959–1960, Scott Crossfield flew all of the contractor’s demonstration phase flights for the X-15, including 16 captive carry flights under the wing of the NB-52A Stratofortress while systems were tested and evaluated, one glide flight, and thirteen powered flights. He reached a a maximum altitude of 88,116 feet (26,858 meters) on Flight 6, and a maximum speed of Mach 2.97 (1,960 miles per hour/3,154 kilometers per hour) on Flight 26. The X-15 was then turned over to NASA and the Air Force. The X-15 Program involved a total of 199 flights from 1959 until 1968.

A. Scott Crossfield, wearing a David Clark Co. XMC-2 full-pressure suit, which he helped to design and test, with the first of three North American X-15s, 56-6670. (North American Aviation, Inc.)

After leaving the X-15 Program, Scott Crossfield continued as a Systems Director with North American Aviation, Inc., working on the Apollo Command and Service Module and the S-IVB second stage of the Saturn V rocket. He left North American in the late ’60s and served as an executive with Eastern Air Lines and Hawker Siddeley. He also continued as a aeronautical engineering consultant to private industry and government.

Among many other awards, Scott Crossfield was received the Harmon Trophy, the Collier Trophy, and the Iven C. Kincheloe Award of the Society of Experimental Test Pilots..

Scott Crossfield's 1962 Cessna 210A Centurion, photographed at Santa Monica Airport, California, 26 September 1999. (AirNikon Collection, Pima Air & Space Museum, Tucson, Arizona via airliners.net)
Scott Crossfield’s Cessna 210A Centurion, N6579X, photographed at Santa Monica Airport, California, 26 September 1999. (AirNikon Collection, Pima Air & Space Museum, Tucson, Arizona via airliners.net, used with permission)

In 1980 Crossfield resumed flying when he purchased a 1960 Cessna 210A Centurion, N6579X, serial number 21057579. This was a single-engine, four-place light airplane, powered by an air-cooled Continental six-cylinder engine. He had flown more than 2,000 hours in this airplane when it crashed during a severe thunderstorm, 19 April 2006, while on a flight from Prattville, Alabama, to Manassas, Virginia.

Albert Scott Crossfield, Jr., was killed. His remains are interred at the Arlington National Cemetery, Arlington, Virginia.

Albert Scott Crossfield, Jr., Test Pilot. (LIFE Magazine via Jet Pilot Overseas)

Highly recommended: Always Another Dawn: The Story Of A Rocket Test Pilot, by Albert Scott Crossfield and Clay Blair, Jr., The World Publishing Company, Cleveland and New York, 1960.

© 2018, Bryan R. Swopes

1 October 1947

A Los Angeles Airways Sikorsky S-51 helicopter takes off from the roof of the Terminal Annex Post Office, 1 October 1947. The Los Angeles Times published this photograph 2 October 1947 with the following caption: “NEW MAIL SERVICE — Los Angeles Airways helicopter shown landing on the roof of Terminal Annex Post office yesterday to inaugurate helicopter air-mail service, the first of its kind in the United States. Two flights daily are planned on this run with another to start Oct. 16.” (Los Angeles Times Photographic Archive/UCLA Library)

1 October 1947: Los Angeles Airways began regularly scheduled air mail service in Los Angeles, using the Sikorsky S-51 helicopter.

“. . . the U.S. Civil Aeronautics Board awarded LAA the route authorities to operate local air mail services in Southern California using the Sikorsky S-51. Before long, LAA was operating a twice-a-day mail service between the main downtown post office and Los Angeles International Airport along with a small package air express service.

“With a fleet of five S-51s, LAA’s first year of operations resulted in 700 tons of mail being carried with approximately 40,000 landings throughout the Los Angeles metropolitan area. The small operation maintained a 95% reliability rate and by the time it began its small package air express service in 1953, it was annually moving nearly 4,000 tons of mail a year.

“In July 1951 the CAB awarded LAA’s reliable helicopter operation the rights for passenger services which started in November 1954 with larger Sikorsky S-55 helicopters while the smaller S-51s continued the mail and small package services. . . .”

Tails Through Timehttp://aviationtrivia.blogspot.com/2010/06/on-1-october-1947-los-angeles-airways.html

The S-51 was a commercial version of the Sikorsky R-5 series of military helicopters. It was a four-place, single-engine helicopter, operated by one pilot. The cabin was built of aluminum with Plexiglas windows. The fuselage was built of plastic-impregnated plywood, and the tail boom was wood monocoque construction. The main rotor consisted of three fully-articulated blades built of metal spars and plywood ribs and covered with two layers of fabric. (All metal blades soon became available.) The three bladed semi-articulated tail rotor was built of laminated wood. The main rotor turned counter-clockwise, as seen from above. (The advancing blade is on the helicopter’s right.) The tail rotor was mounted on the helicopter’s left side in a pusher configuration. It turned clockwise as seen from the helicopter’s left.

The helicopter’s fuselage was 41 feet, 7.5 inches (12.687 meters) long. The main rotor had a diameter of 48 feet (14.630 meters) and tail rotor diameter was 8 feet, 5 inches (2.565 meters), giving the helicopter an overall length of 57 feet, 1 inch (17.399 meters). It was 13 feet, 1.5 inches (4.001 meters) high. The landing gear tread was 12 feet (3.7 meters). The S-51 had an empty weight of 4,050 pounds (1,837 kilograms) and maximum takeoff weight of 5,500 pounds (2,495 kilograms). Fuel capacity was 100 gallons (378.5 liters).

The helicopter was powered by an air-cooled, supercharged, 986.749-cubic-inch-displacement (16.170 liter) Pratt & Whitney Wasp Jr. T1B4 (R-985 AN-5) direct-drive, nine-cylinder radial engine which was placed vertically in the fuselage behind the crew compartment. This engine was rated at 450 horsepower at 2,300 r.p.m., Standard Day at Sea Level. The R-985 AN-5 was 48.00 inches (1.219 meters) long, 46.25 inches (1.175 meters) in diameter and weighed 684 pounds (310.3 kilograms) with a magnesium crankcase.

The S-51 had a maximum speed (Vne) of 107 knots (123.1 miles per hour/198.2 kilometers per hour). Range was 275 miles (442.6 kilometers). The service ceiling was 14,800 feet (4,511 meters). The absolute hover ceiling was 3,000 feet (914.4 meters).

Of 220 helicopters in the S-51 series built by Sikorsky, 55 were commercial models.

Los Angeles Airways Sikorsky S-51 (Viewliner)
A Los Angeles Airways Sikorsky S-51. The main rotor hub is covered. (Viewliner)

© 2016, Bryan R. Swopes

1 October 1947

North American Aviation test pilot George S. Welch, flying the first of three XP-86 prototypes, serial number 45-59597. (North American Aviation, Inc.)

1 October 1947: After three years development in which 801,386 engineering hours and 340,594 drafting hours had been expended, the first prototype North American Aviation XP-86 (company designation NA-140), serial number 45-59597, was ready for its first flight at Muroc Dry Lake in the high desert, north of Los Angeles, California.

Completed at North American’s Inglewood plant on 8 August 1947, it was trucked to Muroc in mid-September. It was reassembled, everything was checked out, and after a few taxi tests, company test pilot George S. Welch took off for a initial familiarization flight. Chief Test Pilot Bob Chilton flew chase in an XP-82 Twin Mustang with a company photographer on board. The duration of the first flight was 1 hour, 18 minutes.

Recently completed, the first prototype XP-86, 45-59597, waits inside the North American Aviation plant at Inglewood, California, 14 August 1947. (North American Aviation, Inc.)

During this first flight, George Welch climbed to 35,000 feet (10,668 meters):

“In a little more than ten minutes he had reached 35,000 feet. Leveling out, the test pilot smiled as he watched the indicated airspeed accelerate to 320 knots. He estimated that should be 0.90 Mach number. . . Rolling into a 40 degree dive, he turned west. . . The airspeed indicator seemed to be stuck at about 350 knots. The Sabre was behaving just fine. Then at 29,000 feet, there was a little wing roll. Correcting the roll, George pushed into a steeper dive. The airspeed indicator suddenly jumped to 410 knots and continued to rise. At 25,000 feet, he pulled the Sabre into level flight and reduced power. The wing rocked again and the airspeed jumped back to 390.”

Aces Wild: The Race for Mach 1, by Al Blackburn, Scholarly Resources Inc., Wilmington, Delaware, 1998, at Chapter 5, Pages 144–145.

George Welch was the first to report instrument readings that would be referred to as “Mach jump.” It has been argued that George Welch flew the XP-86 beyond Mach 1 during this flight, breaking the “sound barrier” two weeks before Chuck Yeager did with the Bell X-1 rocketplane. During flight testing, it was firmly established that the XP-86 could reach Mach 1.02–1.04 in a dive, so it is certainly possible that he did so on the Sabre’s first flight.

North American Aviation Model NA-140, the first XP-86 prototype, 45-59597, at Muroc AAF, 1947. (U.S. Air Force)
North American Aviation Model NA-140, the first XP-86 prototype, 45-59597, at Muroc AAF, 1947. (U.S. Air Force)

The XP-86 was unlike any airplane before it. It was the first airplane with a swept wing. After analyzing test data from the Messerschmitt Me 262, North American’s engineers designed a wing with a 35° degree sweepback to its leading edge. The wing tapered toward the tips, and its thickness also decreased from the root to the tip. In order to create a very strong but very thin wing, it was built with a two-layered aluminum skin, instead of ribs and spars, with each layer separated by “hat” sections. The wing sweep allowed high speed shock waves to form without stalling the entire wing.

Cutaway illustration of the XP-86. The speed brake configuation was not used for production aircraft. (North American Aviation, Inc.)

The wing also incorporated leading edge “slats” which were airfoil sections that automatically extended below 290 knots, smoothing the air flow over the wing’s upper surface and creating more lift at slow speeds. Above that speed, aerodynamic forces closed the slats, decreasing drag and allowing for higher speeds. Effectively, the wing could change its shape in flight.

Test pilot George S. Welch, wearing his distinctive orange helmet, in the cockpit of the prototype XP-86. This photograph was taken 14 October 1947. (U.S. Air Force)
This photograph of the XP-86 shows the 35° wing sweep. Test pilot George S. Welch, wearing his distinctive orange helmet, in the cockpit of the prototype XP-86. (North American Aviation, Inc.)

The XP-86 prototypes were 37 feet, 6½ inches (11.443 meters) long with a wingspan of 37 feet, 1–7/16 inches (11.314 meters) and overall height of 14 feet, 9 inches (4.496 meters). The empty weight was 9,730 pounds (4,413.5 kilograms), gross weight, 13,395 pounds (6,075.9 kilograms) and maximum takeoff weight was 16,438 pounds (7,456.2 kilograms).

North American Aviation XP-86 45-59597. (Ray Wagner Collection, San Diego Air & Space Museum Archives, Catalog #: 16_002950)

The XP-86 was initially powered by a General Electric-designed, Chevrolet-built J35-C-3 turbojet which produced 4,000 pounds of thrust. This was soon changed to an Allison J35-A-5. Performance testing was conducted with the Allison engine installed. The J35 was a single-spool, axial-flow turbojet engine with an 11-stage compressor and single-stage turbine. The J35-A-5 was rated at 4,000 pounds of thrust (17.79 kilonewtons) at 7,700 r.p.m. (static thrust, Sea Level). The engine was 14 feet, 0.0 inches (4.267 meters) long, 3 feet, 4.0 inches (1.016 meters) in diameter and weighed 2,400 pounds (1,089 kilograms).

The three North American Aviation XP-86 prototypes. Front to back, 45-59598, 45-59597 and 45-59599. (National Archives and Records Administration)

The maximum speed of the XP-86 at Sea Level was 0.787 Mach (599 miles per hour, 964 kilometers per hour), 0.854 Mach (618 miles per hour, 995 kilometers per hour) at 14,000 feet (4,267 meters) and 575 miles per hour (925 kilometers per hour) at 35,000 feet (10,668 meters)—0.875 Mach.

The prototype fighter was able to take off at 125 miles per hour (201 kilometers per hour) in just 3,020 feet (920.5 meters) of runway. It could climb to 30,000 feet (9,144 meters) in 12.1 minutes and had a service ceiling of 41,300 feet (12,588 meters).

The end of XP-86 45-59597 at Frenchman Flats, 1953.

XP-86 45-59597 was expended as a target during nuclear weapons tests. On 25 May 1953, it was 1,850 feet from ground zero of Upshot Knothole Grable. The only part still intact was the engine, which was thrown 500 feet.

Upshot Knothole Grable (National Nuclear Security Administration CIC 0315864)
George S. Welch, North American Aviation test pilot, wearing his orange flight helmet. An F-86 Sabre is in the background. (San Diego Air and Space Museum Photo Archives)

George Welch was born George Lewis Schwartz, in Wilmington, Delaware, 10 May 1918. His parents changed his surname to Welch, his mother’s maiden name, so that he would not be effected by the anti-German prejudice that was widespread in America following World War I. He studied mechanical engineering at Purdue, and enlisted in the Army Air Corps in 1939.

George S. Welch is best remembered as one of the heroes of Pearl Harbor. He was one of only two fighter pilots to get airborne during the Japanese surprise attack on Hawaii, 7 December 1941. Flying a Curtiss P-40B Warhawk, he shot down three Aichi D3A “Val” dive bombers and one Mitsubishi A6M2 Zero fighter. For this action, Lieutenant General H.H. “Hap” Arnold recommended the Medal of Honor, but because Lieutenant Welch had taken off without orders, an officer in his chain of command refused to endorse the nomination. He received the Distinguished Service Cross.

During World War II, George Welch flew the Bell P-39 Airacobra and Lockheed P-38 Lightning on 348 combat missions. He had 16 confirmed aerial victories over Japanese airplanes and rose to the rank of Major.

Suffering from malaria, George Welch was out of combat, and when North American Aviation approached him to test the new P-51H Mustang, General Arnold authorized his resignation. Welch test flew the P-51, FJ-1 Fury, F-86 Sabre and F-100 Super Sabre. He was killed 12 October 1954 when his F-100A Super Sabre came apart in a 7 G pull up from a Mach 1.5 dive.

North American Aviation F-86-A-NA Sabre 47-630. (North American Aviation, Inc./Chicago Tribune)
An early production aircraft, North American Aviation P-86A-1-NA Sabre 47-630 (s/n 151-38457). (North American Aviation, Inc./Chicago Tribune)

After testing, the North American Aviation XP-86 was approved for production as the F-86A. It became operational in 1949. The first squadron to fly the F-86 held a naming contest and from 78 suggestions, the name “Sabre” was chosen. The F-86 Sabre was in production until 1955 at North American’s Inglewood, California, and Columbus, Ohio, plants. It was also built under license by Canadair, Ltd., Sain-Laurent, Quebec, Canada; the Commonwealth Aircraft Corporation, Port Melbourne, Victoria, Australia; and Mitsubishi Heavy  Industries at Nagoya, Aichi Prefecture, Japan. A total of 9,860 Sabres were built. They served with the United States Air Force until 1970.

XP-86 45-59597 was expended in nuclear weapons tests, Operation Snapper Easy and Snapper Fox, at the Nevada Test Site, Frenchman’s Flat, Nevada, in May 1952. The second and third prototypes, 45-59598 and 45-59599, met similar fates.

© 2017, Bryan R. Swopes

1 October 1942

Bell XP-59A Airacomet 42-108784, first flight at Muroc Dry Lake, 1 October 1942. (U.S. Air Force)

1 October 1942: At Muroc Dry Lake, in the high desert north of Los Angeles, California, Bell Aircraft Corporation’s Chief Test Pilot, Robert Morris Stanley, made the first flight of the top secret prototype turbojet-powered fighter, the Bell XP-59A Airacomet, serial number 42-108784. Weather was “C.A.V.U.” (Ceiling and Visibility Unrestricted) and wind was from the west at 20 miles per hour (9 meters per second).

Bell Aircraft Corporation Chief Test Pilot Robert M. Stanley in the cockpit of an XP-59A Airacomet. (National Museum of the United States Air Force)

In his report, Stanley wrote:

4.     All take-offs were made using 15,000 r.p.m. on both engines with flaps fully up and with the airplane pulled off the ground at about 80 to 90 m.p.h. Throttle was applied promptly and acceleration during take-off appeared quite satisfactory. The run was estimated to be in the vicinity of 2,000 feet, possibly more. The first flight reached an altitude of approximately 25 feet, and landing was made using partial power without flaps. This take-off had the wind approximately 60° on the right bow and must be considered a cross-wind take-off.

5.     Aileron and elevator action appear satisfactory, although the rudder force appears undesirably light causing the airplane to yaw somewhat for very light pedal pressures. Left rudder was needed for take-off due to cross wind.

—Bell Aircraft Corp. Pilot’s Report 27-923-001, at Page 1-12, by Robert M. Stanley, 1 October 1942

Bell XP-59A Airacomet 42-108784 disguised with a false propeller. (U.S. Air Force)
One of the three Bell XP-59A prototypes, circa 1942. (U.S. Air Force)
Bell Aircraft Corporation XP-59A Airacomet 42-108784. (U.S. Air Force photo)
Bell Aircraft Corporation P-59 Airacomet with updated national insignia, after August 1943. (U.S. Air Force photo)
Bell Aircraft Corporation XP-59A Airacomet 42-108784. (U.S. Air Force photo)

Stanley made three more flights that day, as high as 100 feet (30.5 meters). The following day, Army Air Corps test pilot Colonel Laurence C. Craigie conducted the “official” first flight, reaching an altitude of 10,000 feet (3,048 meters).

A Bell XP-59A Airacomet prototype in flight near Muroc Army Airfield, 1942. (U.S. Air Force)

Three XP-59A prototypes were built. The number one ship, 42-108784, was affectionately nicknamed Miss Fire, because of the initial difficulty in getting the engines to start.

The Bell XP-59A was conventional single-place airplane with retractable tricycle landing gear. It was primarily of metal construction, though the control surfaces were fabric-covered. The prototype was 38 feet, 10 inches (11.836 meters) long with a wingspan of 49 feet, 0 inches (14.935 meters) and overall height of 12 feet, 3¾ inches (3.753 meters), at rest. The leading edge of the wings were swept aft  7°. The angle of incidence was +2° with -2° twist and 2½° dihedral. The horizontal stabilizer had a span of 16 feet, 8 inches (5.080 meters). Its angle of incidence was +1½° with no dihedral. The vertical fin had 0° offset. The empty weight of the XP-59A was 7,319 pounds (3,320 kilograms) and its maximum gross weight was 10,089 pounds (4,576 kilograms).

A cutaway display of a General Electric I-A turbojet engine. The compressor and turbine are on a single shaft (center). One of the combustion chambers is sectioned at the upper left. (National Museum of the United States Air Force)
A cutaway display of a General Electric I-A turbojet engine. The single-stage centrifugal compressor and single-stage axial-flow turbine are on a single shaft (center). One of the annular combustion chambers is sectioned at the upper left. (National Museum of the United States Air Force)

The experimental fighter was initially powered by two General Electric Type I-A centrifugal reverse-flow turbojet engines, serial numbers 170121 (left) and 170131 (right), each producing 1,250 pounds of thrust (5.561 kilonewtons) at 15,000 r.p.m. These were copies of the British Whittle W.2B engines. They were heavy, underpowered and unreliable.

Performance of the XP-59A was disappointing with a maximum speed of 350 miles per hour (563 kilometers per hour) at Sea Level and 389 miles per hour (626 kilometers per hour) at 35,160 feet (10,717 meters), significantly slower than many piston-engined fighters.

Three XP-59A prototypes and thirteen YP-59A preproduction airplanes were built. The P-59 was ordered into production and Bell Aircraft Corporation built thirty P-59A and twenty P-59B fighters. These were armed with one M4 37mm autocannon with 44 rounds of ammunition and three Browning AN-M2 .50-caliber machine guns with 200 rounds per gun.

Although a YP-59A had set an unofficial altitude record of 47,600 feet (14,508 meters), the Airacomet was so outclassed by standard production fighters that no more were ordered.

Lawrence D. ("Larry") Bell with his XP-59A Airacomet at Muroc Dry Lake. (Robert F. Dorr Collection)
Lawrence D. Bell with his XP-59A Airacomet at Muroc Dry Lake. (Robert F. Dorr Collection)

The race for a jet engine-powered fighter had been ongoing for several years, and the United States’ XP-59A was trailing behind. The first jet airplane, the Heinkel He 178, had made its first flight in Germany three years earlier, on 27 August 1939, though it was a proof-of-concept article, not an operational military aircraft. In the United Kingdom, the Gloster E/28.39, also a proof-of-concept aircraft, though more advanced than the Heinkel, made its first flight, 15 May 1941. The world’s first operational jet fighter, the Messerschmitt Me 262, made its first flight on 18 July 1942. It was nearly two years before production Me 262s entered combat, but they were devastating against bomber formations. The Gloster Meteor, the Allies’ first jet fighter, first flew 5 March 1943, and deliveries to fighter squadrons began in July 1944. The de Havilland DH.100 Vampire made its first flight 20 September 1943, but it did not become operational until after the end of World War II.

The XP-59A flew nearly five months before its British cousin, but would not be assigned to an operational squadron, the 445th Fighter Squadron, 412th Fighter Group, until June 1945.

The first American military jet aircraft, Bell XP-59A Airacomet 42-108784, was preserved by the Army at Muroc, and the engines at Wright Field, Ohio. In 1978, these were given to the Smithsonian Institution National Air and Space Museum where the prototype was later restored and placed on display.g9

The first American jet-powered aircraft, Bell XP-59A Airacomet 42-108784 on display at the National Air and Space Museum. (NASM)

© 2018, Bryan R. Swopes

30 September 1982

H. Ross Perot, Jr. and Jay W. Coburn with Bell 206L-1 LongRanger II, N3911Z, after their 29-day around-the-world flight. (© Bettman/Corbis)

30 September 1982: H. Ross Perot, Jr. and Jay W. Coburn completed their around-the-world helicopter flight when they landed Spirit of Texas at their starting point at Dallas, Texas. They had flown the single-engine Bell 206L-1 LongRanger II, serial number 45658, civil registration N3911Z, more than 26,000 miles (41,843 kilometers) in 246.5 flight hours over 29 days, 3 hours and 8 minutes.

They had begun their journey 1 September 1982. Perot and Coburn traveled across twenty-six countries. They established a Fédération Aéronautique Internationale (FAI) record for helicopter speed around the world, eastbound, having averaged 56.97 kilometers per hour (35.399 miles per hour). (Class E-1d, FAI Record File Number 1254). They also established a series of point-to-point records while enroute, with the highest speed, an average of 179.39 kilometers per hour (111.47 miles per hour), taking place on 7 September 1982, while flying Spirit of Texas from London to Marseilles (FAI Record File Number 10018).

The Bell Helicopter Company Model 206L-1 LongRanger II is a 7-place light helicopter developed from the earlier 5-place Model 206B JetRanger series. It is designed to be flown by a single pilot in the right front seat, and is certified for Visual Flight Rules.

The 206L-1 is 42 feet, 8 inches (13.005 meters) long, overall, and the two-bladed main rotor is semi-rigid and under-slung, a common feature of Bell’s main rotor design. It has a diameter of 37 feet (11.278 meters) and turns counter-clockwise (seen from above) at 394 r.p.m. (100% NR). (The advancing blade is on the helicopter’s right side.) The rotor blade has a chord of 1 foot, 1.0 inches (0.330 meter) and 11° negative twist. The blade tips are swept.

The two-bladed tail rotor assembly is also semi-rigid and is positioned on the left side of the tail boom in a pusher configuration. It turns clockwise, as seen from the helicopter’s left. (The advancing blade is below the axis of rotation.) The tail rotor diameter is 5 feet, 6.0 inches (1.676 meters).

The LongRanger II is powered by an Allison 250-C28B turboshaft engine. This engine produces 500 shaft horsepower but is de-rated to 435 horsepower, the limit of the main transmission. The engine is mounted above the roof of the fuselage, to the rear of the main transmission. Output shafts lead forward to the transmission and the tail rotor drive shaft aft to the tail rotor 90° gear box. The transmission and rotor mast are mounted angled slightly forward and to the right. This assists in the helicopter’s lift off to a hover, helps to offset its translating tendency, and keeps the passenger cabin in a near-level attitude during cruise flight.

A vertical fin is attached at the aft end of the tail boom. The fin is offset 4° to the right to unload the tail rotor in cruise flight. Fixed horizontal stabilizers with an inverted asymmetric airfoil are attached to the tail boom. In cruise flight, these provide a downward force that keeps the passenger cabin in a near-level attitude. Vertical fins are attached to the outboard ends of the horizontal stabilizers and above the tailboom centerline. The fins are slightly offset to the left and counteract the helicopter’s Dutch roll tendency.

The helicopter has an empty weight of approximately 2,160 pounds (979 kilograms), depending on installed equipment, and the maximum gross weight is 4,050 pounds (1,836 kilograms).

The Model 206L LongRanger first flew in 1974 and the 206L-1 LongRanger II variant entered production in 1978. It was replaced several years later by the 206L-3. The LongRanger remains in production as the Model 206L-4.

Screen Shot 2015-09-30 at 09.44.55 Perot had purchased the LongRanger II for $750,000, specifically for this flight. Modifications started immediately and over the next three weeks an additional 151-gallon fuel tank was added giving the helicopter approximately 8 hours’ endurance. “Pop-out floats”—inflatable pontoons that can be deployed for emergency landings on water—were installed. The helicopter also carried a life raft and other emergency equipment and supplies. Additional communication, navigation equipment and radar was installed.

Spirit of Texas aboard a container ship.
N3911Z aboard a container ship.

During the circumnavigation, the helicopter burned 56,000 pounds (25,400 kilograms) of jet fuel and made 56 fueling stops, including aboard a pre-positioned container ship in the North Pacific Ocean.

The helicopter was donated to the Smithsonian Institution and is on display at the Steven V. Udvar-Hazy Center of the National Air and Space Museum.

Bell 206L-1 LongRanger II s/n 45658, N3911Z, “Spirit of Texas,” on display at the Steven F. Udvar-Hazy Center of the Smithsonian Institution National Air and Space Museum. (NASM)

© 2016, Bryan R. Swopes