Category Archives: Aviation

8 December 1945

Aviation, , , , , , , , , , , , , , , ,
Prototype of the Bell Model 47. (Niagara Aerospace Museum)

8 December 1945: At the Bell Aircraft Corporation Wheatfield Plant, Niagara Falls, New York, the first Model 47 helicopter, NX41962, was rolled out. Designed by Arthur M. Young, the Model 47 was based on Young’s earlier Model 30. The new helicopter made its first flight on the same day.

The Civil Aviation Administration (C.A.A.), predecessor of the Federal Aviation Administration, had never certified a helicopter, so Bell worked with government officials to develop civil certification standards. The Bell 47 received the C.A.A. Type Certificate H-1 on 8 March 1946 and the first helicopter’s registration was changed to NC1H.

Bell Model 47 NX41962, Serial Number 1, at Bell’s Wheatfield Plant, early 1946. (Niagara Aerospace Museum)

The Bell 47 series was constructed of a welded tubular steel airframe with a sheet metal cockpit and a characteristic plexiglas bubble. In the original configuration, it had a four-point wheeled landing gear, but this was soon replaced with a tubular skid arrangement. It was a two-place aircraft with dual flight controls.

The first Bell Model 47 had an overall length (with rotors turning) of 39 feet, 7½ inches (12.078 meters). The main rotor diameter was 33 feet, 7 inches (10.236 meters). The length of the fuselage, from the front of the plexiglass bubble canopy to the trailing edge of the tail rotor disc, was 29 feet, 3½ inches (8.928 meters). The tail rotor had a diameter of 5 feet, 5 inches (1.676 meters). The helicopter’s height, to the top of the main rotor mast, was 9 feet, 2-7/16 inches (2.805 meters).

NC1H had an empty weight of 1,393 pounds (632 kilograms). Its gross weight was 2,100 pounds (953 kilograms).

Bell Aircraft Corp. test pilot Floyd W. Carlson demonstrates the stability of the Model 47 by taking his hands off of the flight controls during a hover. (Bell Helicopter)

The Bell 47’s main rotor is a two-bladed, under-slung, semi-rigid assembly that would be a characteristic of helicopters built by Bell for decades. The blades were constructed of laminated wood, and covered with fabric. A stabilizer bar was placed below the hub and linked to the flight controls through hydraulic dampers. This made for a very stable aircraft. The main rotor turns counter-clockwise, as seen from above. (The advancing blade is on the right.) The tail rotor is positioned on the right side of the tail boom in a tractor configuration. It rotates counter-clockwise as seen from the helicopter’s left. (The advancing blade is above the axis of rotation.)

Floyd Carlson, chief Test Pilot for the Bell Aircraft Corporation, hovers the world’s first civil-certified helicopter, NC1H, Serial Number One. (Niagara Aerospace Museum)

Power was supplied by an air-cooled, normally-aspirated, 333.991-cubic-inch-displacement (5.473 liter) Franklin Engine Company 6V4-178-B3 vertically-opposed six cylinder engine, serial number 17008, rated at 178 horsepower at 3,000 r.p.m. Power was sent through a centrifugal clutch to a transmission which turned the main rotor through a two-stage planetary gear reduction system with a ratio of 9:1. The transmission also drove the tail rotor drive shaft, and through a vee-belt/pulley system, a large fan to provide cooling air for the engine.

The new helicopter had a cruise speed of 75 miles per hour (121 kilometers per hour) and a maximum speed (VNE) of 80 miles per hour (129 kilometers per hour). NC1H had a service ceiling of 11,400 feet (3,475 meters).

The Bell 47 gained fame during the Korean War as a rescue helicopter, transferring wounded soldiers directly to Mobile Army Surgical Hospitals placed near the front lines. Here, a wounded soldier is offloaded from an H-13D-1 Sioux. (U.S. Army)
The Bell 47 gained fame during the Korean War as a rescue helicopter, transferring wounded soldiers directly to Mobile Army Surgical Hospitals placed near the front lines. Here, a wounded soldier is offloaded from an H-13D-1 Sioux. (U.S. Army)
The manufacturer's data plate for Bell Model 47, Serial Number 1. (Niagara Museum of Aeronautics)
The manufacturer’s data plate for Bell Model 47, Serial Number 1. (Niagara Museum of Aeronautics)

The Bell 47 was produced at the plant in New York, and later at Fort Worth, Texas. It was steadily improved and remained in production until 1974. In military service the Model 47 was designated H-13 Sioux, (Army and Air Force), HTL (Navy) and HUG (Coast Guard). The helicopter was also built under license by Agusta, Kawasaki and Westland. More than 7,000 were built worldwide and it is believed that about 10% of those remain in service.

In 2010, the type certificates for all Bell 47 models was transferred to Scott’s Helicopter Service, Le Sueur, Minnesota, which continues to manufacture parts and complete helicopters.

After certification testing and demonstrations, NC1H was one of two Bell 47s used for flight training. The first Bell 47, s/n 1, crashed at Niagara Falls Airport, 3 April 1946.

While hovering out of ground effect, a student inadvertently oversped the main rotor by decreasing collective pitch when he had intended to increase it. The main rotor hub separated and the helicopter dropped to the ground. Both the student and instructor were injured. Damage to NC1H was extensive and the helicopter was scrapped. The registration, NC1H, was reassigned to Bell 47 s/n 11.

Wreck of Bell Model 47 NC1H, s/n 1. (Niagara Aerospace Museum)

© 2018, Bryan R. Swopes

8 December 1945

Aviation, , , , , , , , , , , , , ,

The second prototype Douglas XB-42, 43-50225, In this photograph, the dual bubble canopies have been replaced with a single canopy to improve flight crew communication. (U.S. Air Force)
The second prototype Douglas XB-42, 43-50225, In this photograph, the dual bubble canopies have been replaced with a single canopy to improve flight crew communication. (U.S. Air Force)

8 December 1945: Lieutenant Colonel Henry E. Warden and Captain Glen W. Edwards, U.S. Army Air Corps, flew the second prototype Douglas XB-42, serial number 43-50225, from Long Beach, California to Washington, D.C., in 5 hours, 17 minutes, 34 seconds, averaging 433.6 miles per hour (697.8 kilometers per hour).

Douglas XB-42 43-50224, the first prototype. Note the dual canopy arrangement. (U.S. Air Force)

The XB-42 (originally designated as an attack aircraft, XA-42) was as unusual design. It used two engines inside the fuselage to drive contra-rotating three-bladed propellers in a pusher configuration at the tail. This created a very low-drag aircraft that was much faster than similar sized and powered aircraft.

Douglas XB-42 43-50225, the second prototype. (U.S. Air Force)
Douglas XB-42 43-50225, the second prototype. (U.S. Air Force)

A pilot and co-pilot sat side-by-side under separate bubble canopies. (This was later changed to improve communication between the crew.) The third crewman, a navigator/bombardier, occupied the nose. The co-pilot also served as a gunner and could operate four remotely-controlled .50-caliber machine guns located in two retractable power turrets inside the trailing edge of the wings. Another two .50-caliber machine guns were fixed, aimed forward. The bomber was designed to carry a 8,000 pound (3,629 kilogram) bomb load.

Douglas XB-42 43-50224 takes off from Palm Springs, California. (U.S. Air Force)

The XB-42 was powered several variants of the Allison Engineering Company E-series V-1710 engines, confiured as combined power assembles, and driving a remote propeller gear box through five Bell P-39 Airacobra driveshafts. The starboard engine turned counter-clockwise and drove the rear propeller. The port engine turned clockwise and drove the forward propeller. These engines were the V-1710-E23 (V-1710-103), V-1710-E24 (V -1710-125) and V-1710-E23B (V-1710-129). The V-1710 was a liquid-cooled, supercharged 1,710.60-cubic-inch-displacement (28.032 liter) single-overhead-camshaft (SOHC) 60° V-12 aircraft engine with four valves per cylinder. The engines used in the XB-42 had two-stage superchargers and turbosuperchargers.

Driveline of the Douglas XB-42. (Allison)

Douglas XB-42A 43-50224, low pass, circa 1947. Note the Westinghouse 19XB-2A turbojet engines in underwing pods. (U.S. Air Force)

The V-1710-129 was an experimental turbocompound engine, in which an exhaust-driven turbocharger is coupled to the drive shaft to provide a direct power input. It had a compression ratio of 6.65:1 and required 100/130 octane aviation gasoline. The V-1710-129 had a continuous power rating of 1,050 horsepower at 2,600 r.p.m., at Sea Level, and takeoff/military power rating of 1,675 horsepower at 3,200 r.p.m. (1,100 horsepower at 3,000 r.p.m. at 25,000 feet (7,620 meters) ). The engines turned three-bladed, counter-rotating, Curtiss Electric propellers through a 2.773:1 gear reduction. The forward propeller had a diameter of 13 feet, 2 inches (4.013 meters) and the rear diameter was 13 feet (3.962 meters). The difference was to prevent interference of the blade tip vortices.

Douglas XB-42 43-50224. (U.S. Air Force)
Douglas XB-42 43-50224. (U.S. Air Force)

The airplane was 53 feet, 8 inches long (16.358 meters), with a wingspan of 70 feet, 6 inches (21.488 meters). Empty weight was 20,888 pounds (9,475 kilograms), with a maximum gross weight of 35,702 pounds (16,194 kilograms). The prototype’s cruising speed was 310 miles per hour (499 kilometers per hour) and its maximum speed was 410 miles per hour (660 kilometers per hour) at 23,500 feet (7,163 meters). The service ceiling was 29,400 feet (8,961 meters). The XB-42’s normal range was 1,840 miles (2,961 kilometers).

Captain Glen W. Edwards, U.S. Air Force (1918–1948)
Captain Glen W. Edwards, U.S. Air Force (1918–1948)

Glen W. Edwards graduated from the University of California, Berkeley and soon after enlisted in the U.S. Army Air Corps. He was commissioned as a second lieutenant in February 1942 after completing flight training. Edwards flew 50 combat missions in the Douglas A-20 Havoc attack bomber during the North Africa and Sicily campaigns of World War II. He returned to the United States and was assigned to the Pilot Standardization Board, but was then sent to train as a test pilot at Wright Field. He tested the Northrop XB-35 flying wing and the Convair XB-46. He was recommended to fly the Bell X-1 rocket plane, but when that assignment went to Chuck Yeager, Edwards was sent to Princeton University, Princeton, New Jersey, to study aeronautical engineering.

Captain Edwards was killed along with four others while test flying the Northrop YB-49 “Flying Wing” in 1948. In 1949, Muroc Air Force Base, California, was renamed Edwards Air Force Base in his honor.

General Reuben C. Hood congratulates Captain Glen Edwards and Lieutenant Colonel Harold E. Warden after their record-setting transcontinental flight, 8 December 1945. ( © Bettman/CORBIS.)
(Left to right) Brigadier General Reuben C. Hood, Jr., congratulates Captain Glen W. Edwards and Lieutenant Colonel Harold E. Warden after their record-setting transcontinental flight, 8 December 1945. ( © Bettman/CORBIS.)

Colonel Henry E. (“Pete”) Warden (1915–2007) flew Curtiss P-40 Warhawks with the 20th Pursuit Squadron in the Philippine Islands at the beginning of World War II. He  was evacuated from Bataan to Australia, where he set up and ran the air logistics system for several years, before being sent to Wright Field.

After World War II, Warden was responsible for the development of the Convair B-36, Boeing B-47 and the Boeing B-52. He was called the “Father of the B-52.” After retiring from the Air Force, Colonel Warden went to work for North American Aviation on the B-70 Valkyrie program.

XB-42 43-50224 flew for the first time 1 August 1944. On 16 December 1945, it was on a routine flight from Bolling Field, Washington, D.C., with Lieutenant Colonel Fred J. Ascani in command, when a series of failures caused the crew to bail out. The XB-42 crashed at Oxon Hill, Maryland and was destroyed.

The second prototype, 43-50225, is in storage at the National Museum of the United States Air Force, Wright Patterson AFB, Ohio.

The first prototype XB-42, 43-50224, at Palm Springs, California, 1945. (U.S. Air Force)
The first prototype XB-42, 43-50224, at Palm Springs, California, 1945. (U.S. Air Force)

© 2016, Bryan R. Swopes

7 December 1955

Aviation, , , , , , ,

Boeing B-52D-1-BW Stratofortress 55-0049 is rolled out of Wichita Plant II, 12:40 p.m., 7 December 1955. Three B-47 Stratojets are in the background. (Unattributed)

7 December 1955: At approximately 12:40 p.m., the first Wichita-built Boeing B-52 Stratofortress, B-52D-1-BW 55-0049, (MSN 464001) was rolled out of Plant II.

55-0049 made its first flight 14 May 1956, and was delivered to the Air Force on 26 June of that year.

On 26 September 1958, 55-0049 set two Fédération Aéronautique Internationale (FAI) world records for speed.¹

The record-setting Stratofortress was sent The Boneyard at Davis-Monthan AFB, Tucson, Arizona, 4 October 1978. It was later scrapped.

Boeing B-52D-1-BW Stratofortress 55-0049 (the first Wichita-built B-52) in flight. This is the same type bomber that set two world records 26 September 1958. (U.S. Air Force)

¹ FAI Record File Numbers 8498, 8499 (see This Day in Aviation, 26 September 1958)

© 2022, Bryan R. Swopes

7 December 1941

Aviation, , , , , , , , , , , ,

Lieutenants Ken Taylor and George Welch, U.S. Army Air Corps. (U.S. Air Force)
Lieutenants Kenneth Marlar Taylor and George Schwartz Welch, Air Corps, United States Army. (U.S. Air Force)

On the morning of December 7, 1941, very few American fighter pilots were able to get airborne to fight the Japanese attackers. Ken Taylor and George Schwartz were two of them.

Distinguished Service Cross
Distinguished Service Cross

Second Lieutenants Kenneth Marlar Taylor and George S. Welch took two Curtiss-Wright P-40B Warhawk fighters from a remote airfield at Haleiwa, on the northwestern side of the island of Oahu, and against overwhelming odds, each shot down four enemy airplanes: Welch shot down three Aichi D3A Type 99 “Val” dive bombers and one Mitsubishi A6M2 Type 0 (“Zero”) fighter. Taylor also shot down four Japanese airplanes.

Although both officers were nominated for the Medal of Honor by General Henry H. (“Hap”) Arnold, they were awarded the Distinguished Service Cross.

During the War, Welch flew the Bell P-39 Airacobra and Lockheed P-38 Lightning on 348 combat missions. He had 16 confirmed aerial victories over Japanese airplanes and rose to the rank of Major.

Suffering from malaria, George Welch was out of combat and recuperating in Australia. When North American Aviation approached General Arnold to recommend a highly experienced fighter pilot as a test pilot for the P-51H Mustang, Arnold suggested Welch and authorized his resignation from the Air Corps.

Aichi D3A Type 99 dive bomber, “Val”. (San Diego Air and Space Museum Archives)

George Welch tested the P-51H, XP-86 Sabre and YF-100A Super Sabre for North American Aviation. Reportedly, while demonstrating the F-86 Sabre’s capabilities to Air Force pilots during the Korean War, he shot down as many as six MiG 15s.

George Welch was killed while testing a F-100A Super Sabre, 12 October 1954.

A Mitsubishi A6M2 Type 0 Model 21, A1-108, flown by PO2c Sakae Mori, takes of from IJN Akagi, an aircraft carrier of the Imperial Japanese Navy, 7 December 1941. (U.S. Navy)

Ken Taylor scored two more victories at Guadalcanal before wounds received in an air raid sent him back to the United States. He remained in the Air Force until he retired in 1971 with the rank of Brigadier General. He died in 2006.

Curtiss-Wright P-40 Warhawk, circa 1940. (Rudy Arnold Collection/NASM)

The Curtiss-Wright Corporation Hawk 81B (P-40B Warhawk) was a single-seat, single-engine pursuit. It was a low-wing monoplane of all-metal construction, and used flush riveting to reduce aerodynamic drag. It had an enclosed cockpit and retractable landing gear. Extensive wind tunnel testing at the NACA Langley laboratories refined the airplane’s design, significantly increasing the top speed.

The P-40B Warhawk was 31 feet, 8¾ inches (9.671 meters) long, with a wingspan of 37 feet, 4 inches (11.379 meters). Its empty weight was 5,590 pounds (2,536 kilograms), and 7,326 pounds (3,323 kilograms) gross. The maximum takeoff weight was 7,600 pounds (3,447 kilograms).

The P-40B was powered by a liquid-cooled, supercharged, 1,710.60-cubic-inch-displacement (28.032 liter) Allison Engineering Co. V-1710-C15 (V-1710-33), a single overhead cam (SOHC) 60° V-12 engine, which produced 1,040 horsepower at 2,800 r.p.m., and turned a three-bladed Curtiss Electric constant-speed propeller through a 2:1 gear reduction. The V-1710-33 was 8 feet, 2.54 inches (2.503 meters) long, 3 feet, 5.88 inches (1.064 meters) high, and 2 feet, 5.29 inches (0.744 meters) wide. It weighed 1,340 pounds (607.8 kilograms).

Allison Engineering Co. V-1710-33 V-12 aircraft engine at the Smithsonian Institution National Air and Space Museum Steven F. Udvar-Hazy Center. (NASM)
Allison Engineering Co. V-1710-33 V-12 aircraft engine at the Smithsonian Institution National Air and Space Museum Steven F. Udvar-Hazy Center. (NASM)

Heavier than the initial production P-40, the P-40B was slightly slower, with a maximum speed of 352 miles per hour (567 kilometers per hour) at 15,000 feet (4,572 meters). It had a service ceiling of 32,400 feet (9,876 meters) and range of 730 miles (1,175 kilometers).

Armament consisted of two air-cooled Browning AN-M2 .50-caliber machine guns mounted in the cowlingabove the engine and synchronized to fire forward through the propeller arc, with 380 rounds per gun, and four Browning M2 .30-caliber aircraft machine guns, with two in each wing.

Curtiss-Wright produced 13,738 P-40s between 1939 and 1944. 131 of those were P-40B Warhawks.

A flight of six Curtiss P-40B Warhawks of the 44th Pursuit Squadron, 18th Pursuit Group, over the Territory of Hawaii, August 1941. (U.S. Air Force)
A flight of six Curtiss-Wright P-40B Warhawks of the 44th Pursuit Squadron, 18th Pursuit Group, over the island of Oahu, Territory of Hawaii, 9:00 a.m., 1 August 1941. (U.S. Air Force)

© 2018, Bryan R. Swopes