Tag Archives: Commercial Transport

25 June 1919

First flight of the Junkers F.13 at Dessau, Germany, 25 June 1919. (Junkers)

25 June 1919: Junkers Flugzeugwerke Aktiengesellschaft test pilot Emil Monz made the first flight of the Junkers F.13 at Dessau, Saxony-Anhalt, Germany. It was the first airplane to be built of all-metal construction specifically for commercial passenger service. The the first flyable prototype, constructor’s number (c/n) 533, carried the identification mark D 183. Professor Junkers had named the airplane Herta in honor of his oldest daughter.¹

Up to this time, airplanes had been primarily constructed of wood. Wood is susceptible to changes in dimension because of temperature and humidity, and it can warp over time. This effects the flight characteristics of the aircraft. Wood is also vulnerable to termites.

By building the airplane of metal, a much more rigid structure was created. The airplane’s flight characteristics did not change over time. Also, because metal is so much stronger than wood, an all-metal airplane could be significantly lighter than one built of wood.

The cockpit of the Junkers F.13 accommodated two pilots. (Junkers)
The cockpit of the Junkers F.13 accommodated a crew of two. (Junkers)
Otto Reuter (Junkers)

Designed by Chief Engineer Otto Reuter, the F.13 was a single-engine, low-wing monoplane (tiefdecker) with a corrugated duralumin skin over a duralumin structure. It had a flight crew of two and four passengers could be carried in a comfortable enclosed cabin of the same size as automobiles of the time. The single wing was cantilevered and, unusually for the time, used no braces or support wires.

The prototype had a wingspan of 14.47 meters (47 feet, 5.7 inches). The wingspan was increased to 14.82 meters (48 feet, 7.5 inches) in production airplanes. The airplane was 9.59 meters (31 feet, 5.6 inches) long and 4.10 meters (13 feet, 5.4 inches) high. It had a maximum takeoff weight of 1,800 kilograms (3,968 pounds).

The first of three prototypes to fly, Junkers F.13 D 183, Herta, photographed on 19 August 1919. (Junkers)

The first F.13 was powered by a water-cooled, normally-aspirated 14.778 liter (901.81 cubic inch) Daimler Motoren Gesellschaft Mercedes D.IIIa vertical inline six-cylinder engine. This was a single overhead cam right-hand tractor direct-drive engine. It used two valves per cylinder and a compression ratio of 4.64:1. It produced 174 horsepower at 1,400 r.p.m., and drove a two-bladed, fixed-pitch laminated wood propeller. The D.IIIa weighed 660.0 pounds (299.4 kilograms), including the propeller hub and exhaust manifold.

Production airplanes used BMW and Junkers engines.

The F.13 had a maximum speed of 170 kilometers per hour (106 miles per hour).

The passenger compartment of the Junkers F.13 seated for passengers. (Junkers)
The passenger compartment of the Junkers F.13 seated for passengers. (Junkers)

In production from 1919 to 1932, a total of 332 Junkers F.13s were built. Some remained in service in the late 1930s.

In 1920, D 183 was confiscated by the Inter-Allied Control Commission. Later, the F.13 flew for Lufthansa. The registration mark was changed to D 1 and it was named Nachtigall (Nightingale).

Junkers F.13 D 1, Nachtigall, in Luft Hansa livery at Berlin-Templehoff.
Emil Monz

Emil Monz was born 9 June 1893, in Stuttgart, Germany. He was the son of Karl and Mathilde Monz. He married Fräulein Maline Georgine Erhardt, 24 January 1915, at Weingarten u. Wilhelmsdorf, Württrmberg, Deutschland.

During World War I, Monz was a reconnaissance pilot for the German Empire.

On 13 September 1919, Monz flew the second F.13, with seven passengers on board, to an altitude of 6,750 meters (22,146 feet). This was an unofficial world record.

Emil Monz died 18 February 1921 when the Junkers F.13 that he was flying, D 128, crashed in a snowstorm enroute to Stuttgart.

¹ While it is believed that Professor Junkers named the prototypes after his daughters Herta and Annelise, sources vary over which name was applied to which aircraft. The confusion may be a result of the serial numbers. The first F.13 to fly was c/n 533, while the second had an earlier number, c/n 531.

© 2018, Bryan R. Swopes

11 June 1926

Ford Tri-Motor 4-AT-1, photographed at Ford Airport, Dearborn, Michigan, 5 June 1926. Note the open cockpit. (The Henry Ford)

11 June 1926: The first production Ford 4-AT-A Tri-Motor, serial number 4-AT-1, flew for the first time at Ford Airport, Dearborn, Michigan. It was registered NC2435.

Designed and built by the Stout Metal Airplane Division of the Ford Motor Company as a commercial passenger transport, the Ford Tri-Motor was a high-wing monoplane with fixed landing gear, similar to the Fokker F.VII/3m. One engine was mounted at the nose, and two more were suspended under the wings. It had a crew of three and could carry up to eight  passengers in a completely enclosed cabin.

A distinctive feature of the Tri-Motor’s construction was the corrugated metal skin which was used to provide strength and rigidity. Corrugated skin panels had been used on the Junkers F.13 in 1919. When Ford began marketing the Tri-Motor in Europe, Junkers sued for patent infringement and won. Ford counter-sued in a different court, and Junkers won again.)

Changes to production airplanes came quickly and no two of the early Tri-Motors were exactly alike.

Ford Tri-Motor 4-AT-1, photographed at Ford Airport, Dearborn, Michigan, 5 June 1926. (The Henry Ford)

The Ford 4-AT-A was 49 feet, 10 inches (15.189 meters) long with a wingspan of 74 feet, 00 inches (22.555 meters) and height of 11 feet, 9 inches (3.581 meters). It had an empty weight of 5,937 pounds (2,693 kilograms) and gross weight of 9,300 pounds (4,218 kilograms).

The 4-AT-A was powered by three air-cooled, normally-aspirated 787.26-cubic-inch-displacement (12.90 liter), Wright Aeronautical Corporation Model J-4 Whirlwind 9-cylinder radial engines. The J-4 Whirlwind had a compressionn ration of 5.3″1 producing 215 h.p. at 1,800 r.p.m., each, and turning two-bladed propellers. The J-4 Whirlwind was 34.0 inches (0.864 meters) long, 44.0 inches (1.118 meters) in diameter, and weighed 475 pounds (215 kilograms).

The Tri-Motor 4-AT-A could cruise at 95 miles per hour (153 kilometers per hour) and a maximum speed of 114 miles per hour (184 kilometers per hour). Its service ceiling was 15,000 feet (4,572 meters) and it had a range of 500 miles (805 kilometers).

This photographg shows four of teh first six Ford Trimotoes at dearborn, Michigan, 27 June 1927. Left to right, 4-AT-3, NC3041, the third built; 4-AT-6, NC2492, the sixth Trimotor; U.S. Navy A-7526, the fourth 4-AT; and 4-AT-1, NC2435, the very first Ford Trimotor built. (Vintage Air)
This photograph shows four of the first six Ford Tri-Motors at Ford Airport, Dearborn, Michigan, 27 June 1927. Left to right, 4-AT-3, NC3041, the third built; 4-AT-6, NC2492, the sixth Tri-Motor; U.S. Navy A-7526, the fourth 4-AT; and 4-AT-1, NC2435, the very first Ford Tri-Motor built. (Vintage Air)

This airplane was very popular at the time and was the foundation for many commercial airlines.  Several were also in military service. Between 1926 and 1933, Ford built 199 Tri-Motors. Though advances in aeronautics quickly made the Tri-Motor obsolete, its ruggedness and simplicity kept it in service around the world for decades.

The very first production Ford Tri-Motor was operated by Ford’s airline, Ford Air Transport Service. It was re-registered NC1492. At 8:45 a.m., 12 May 1928, 4-AT-1 stalled on takeoff at Dearborn. The airliner crashed and caught fire. Pilots William Alexander Munn, 32, and Earl Kenneth Parker, 31, were killed.

Ford 4-AT-B, serial number 4-AT-19, registration NC5092, owned by the Standard Oil Company of California. San Diego Air and Space Museum Archives).
Ford 4-AT-B, serial number 4-AT-19, civil registration NC5092, owned by the Standard Oil Company of California. (San Diego Air and Space Museum Archive)

© 2018, Bryan R. Swopes

30 May 1958

Douglas DC-8-11 N8008D takes of from Long Beach Airport, 10:10 a.m., 30 May 1958.
Douglas DC-8-11 N8008D takes of from Long Beach Airport, 10:10 a.m., 30 May 1958. The heavy exhaust smoke is a result of water injection. (Los Angeles Public Library)

30 May 1958: Douglas Aircraft Company Flight Operations Manager and engineering test pilot Arnold G. Heimerdinger, with co-pilot William M. Magruder and systems engineer Paul H. Patten, were scheduled to take off from Long Beach Airport (LGB) on the coast of southern California, at 10:00 a.m., to make the first flight of the new Douglas DC-8 jet airliner, c/n 45252, FAA registration N8008D.

Crowds of spectators, estimated as many as 50,000 people, were surrounding the airport. For this first test flight, the Federal Aviation Administration required a minimum of five miles visibility. Typical Southern California coastal low clouds and fog caused a ten minute delay.

Taking off at 10:10 a.m., N8008D climbed out to the south over the Pacific Ocean. Escorted by a company-owned Douglas DC-7 engineering and photo plane and a Lockheed T-33A Shooting Star chase, the DC-8 climbed to 11,000 feet (3,353 meters) and went through a series of pre-planned flight maneuvers and systems checks. Heimerdinger took the airliner north to Edwards Air Force Base in the high desert of southern California, where the full flight test program would be carried out. The total duration of the first flight was 2 hours, 10 minutes.

In an article written the following year, Heimerdinger said that the DC-8 was easy to fly and never presented any difficulties during the test program.

Douglas DC-8 N8008D accompanied by a Cessna T-37. (Douglas Aircraft Company)
Douglas DC-8 N8008D accompanied by a U.S. Air Force Cessna T-37 chase plane during a test flight near Edwards Air Force Base, California. (Douglas Aircraft Company)

The Douglas DC-8 Jetliner is a commercial airliner, a contemporary of the Boeing 707 and Convair 880. It was operated by a flight crew of three and could carry up to 177 passengers. It was powered by four turbojet engines mounted on pylons suspended below the wings. The wings’ leading edges were swept to 30° as were the vertical fin and horizontal tailplane. The airplane is 150 feet, 6 inches (45.872 meters) long with a wingspan of 142 feet, 5 inches (43.409 meters) and overall height of 42 feet, 4 inches (12.903 meters). N8008D was a Series 10 version. It had an empty weight of 119,767 pounds (54,325 kilograms) and maximum takeoff weight of 273,000 pounds (123,831 kilograms).

N8008D was originally powered by four Pratt & Whitney JT3C-6 turbojet engines, the same engines which powered its Boeing rival. It is a two-spool, axial-flow turbojet engine with a 16-stage compressor and 2-stage turbine. The JT3C-6 was rated at 11,200 pounds of thrust (49.82 kilonewtons), and 13,500 pounds (60.05 kilonewtons) with water/methanol injection). The JT3C is 11 feet, 6.6 inches (3.520 meters) long, 3 feet, 2.9 inches (0.988 meters) in diameter, and weighs 4,235 pounds (1,921 kilograms). The engines were later upgraded to JT3D-1 turbofan engines which produced 17,000 pounds of thrust.

The DC-8-10 series had a cruising speed of 0.82 Mach (542 miles per hour/872 kilometers per hour) at 35,000 feet (10,668 meters). Its maximum range was 5,092 miles (8,195 kilometers).

Douglas DC-8 N9604Z. (Long Beach Public Library)

On 21 August 1961, a Douglas DC-8-43, N9604Z, c/n 45623, Line Number 130, flown by Chief Test Pilot William Magruder, Paul Patten, Joseph Tomich and Richard Edwards, climbed to 50,090 feet (15,267 meters) near Edwards Air Force Base. Magruder put the DC-8 into a dive, and the airplane reached Mach 1.012 (668 miles per hour/1,075 kilometers per hour) while descending through 41,088 feet (12,524 meters). The airliner maintained this supersonic speed for 16 seconds.

This was the first time that a civil airliner had “broken the Sound Barrier.” An Air Force F-100 Super Sabre and F-104 Starfighter were chase planes for this flight. Reportedly, the F-104 was flown by the legendary test pilot, Colonel Chuck Yeager.

Douglas DC-8-43 N9604Z is accopmanied by a U.S. Air Force Lockheed F-104A Starfighter, near Edwards Air Force base, California.
Douglas DC-8-43 N9604Z, in Canadian Pacific livery, is accompanied by a U.S. Air Force Lockheed F-104A-10-LO Starfighter, 56-0749, near Edwards Air Force Base, California. The dark sky suggests that the airplanes are at a very high altitude. (Unattributed)

N9604Z was powered by four Rolls-Royce Conway RCo.12 Mk 509 two-shaft axial-flow turbofan engines, rated at 17,500 pounds of thrust (77.844 kilonewtons) at 9,990 r.p.m. The 509 is 11 feet, 3.9 inches (3.452 meters) long, 3 feet, 6.2 inches (1.072 meters) in diameter, and weighs 4,542 pounds (2,060 kilograms).

N9604Z was delivered to Canadian Pacific Airlines, 15 November 1961, registered CF-CPG, and named Empress of Montreal. It later flew under CP Air as Empress of Buenos Aires. It was scrapped at Opa Locka Municipal Airport, north of Miami, Florida, in May 1981.

In 1960, N8008D was converted to the DC-8-51 configuration. With a change to the more powerful JT3D-1 turbofan engines, the airliners maximum takeoff weight was increased to 276,000 pounds (125,191 kilograms).

After the flight test and commercial certification program was completed, on 21 June 1961, Douglas leased N8008D to National Airlines, based at Miami, Florida. One year later, 20 June 1961, it was sold to Trans International Airlines. TIA leased the DC-8 to Lufthansa, 11 May 1965, and to Canadian Pacific, 1 October 1966. It was re-registered CF-CPN and named Empress of Santiago.

Douglas DC-8-51 N8008D, owned by Trans International Airways, was photographed at London Gatwick Airport, 23 July 1966. (RuthAS)
Douglas DC-8-51 N8008D, owned by Trans International Airways, was photographed at London Gatwick Airport, 23 July 1966. (RuthAS)

TIA sold the DC-8 to Delta Airlines, Atlanta, Georgia, 1 October 1967. It reverted to its FAA-assigned registration, N8008D. Delta gave it fleet number 800.

In March 1979, Delta sold N8008D to F.B. Myers and Associates. On 1 April, F.B. Myers leased the it to Aerovias de México, S.A. de C.V. (Aeroméxico). The DC-8 was assigned Mexican registration XA-DOE and named Quintana Roo.

The first Douglas DC-8 was placed in storage at Marana-Pinal Airpark, north of Tucson, Arizona, 7 January 1982. In May 1989, it was sold to Agro Air, a Caribbean regional cargo airline. It remained at Marana and was used as a source of parts. In 2001, c/n 45252 it was scrapped.

Between 1959 and 1972, Douglas produced 556 DC-8s in passenger and freighter configurations.

A.G. Heimerdinger
Arnold George Heimerdinger, Flight Operations Manager, Douglas Aircraft Company. (Photograph courtesy of Neil Corbett, Test and Research Pilots, Flight Test Engineers)

Arnold George Heimerdinger was born in Manchester Township, Michigan, 7 December 1910. His parents were Charles and Minnie L. Uphaus Heimerdinger. He studied electrical engineering at the University of Michigan. Heimerdinger married Miss Mary Aileen Eggert 19 August 1935.

A.G. Heimerdinger was commissioned as an ensign in the United States Navy, 27 November 1942 and served as a Naval Aviator until he was released from active duty, 14 October 1945.

Heimerdinger worked as an engineering test pilot for the Federal Aviation Administration, and he flew certification tests of the Boeing 377 Stratocruiser, Convair 240 and 340 Metroliner, and the Lockheed L-640 and L-1049 Constellation.

He joined the Douglas Aircraft Company at Santa Monica, California, in 1952 and remained with the company until he retired in 1974. He was the project test pilot for the Douglas DC-6B and the DC-7. Transferring to Douglas’ Long Beach Division, a few miles southeast, he was project test pilot for the DC-8 and DC-9 jet airliners.

Arnold G. “Heimie” Heimerdinger died at Santa Monica, California, 17 July 1975.

© 2018, Bryan R. Swopes

28 April 1937

Pan American Airways' Martin M-130, China Clipper, at Macau, 1937.
Pan American Airways’ Martin M-130, China Clipper, at Macau, 1937.

28 April 1937: The first transpacific flight by a commercial passenger airliner is completed when Pan American Airways’ Martin M-130, China Clipper, arrived at Hong Kong. The flight had departed San Francisco Bay, California, on 21 April with 7 revenue passengers and then proceeded across the Pacific Ocean by way of Hawaii, Midway Island, Wake Island, Guam, Manila, Macau, and finally Hong Kong. The Reuters news agency briefly reported the event:

AIR LINK AROUND WORLD FORGED.

China Clipper Lands At Hong Kong.

Hong Kong, April 28.

The Pan-American Airways flying boat China Clipper landed at 11:55 this morning from Manila and Macao. This links the Pan-American and Imperial Airways, completing the commercial air link round the world. —Reuter.

The Straits Times, 28 April 1937, Page 1, Column 4.

Pan American Airways’ China Clipper, a Martin M-130, NC14716, over Oakland, California. (Clyde Herwood Sunderland/Library of Congress 94509042)

The Oakland Tribune reported:

AIR CLIPPER SPANS SEAS TO HONGKONG

U.S. MAIL TO CHINA LANDED IN SIX DAYS

Plane Crew Feted at End Of Historic Hop From U.S. Via Philippines

     HONGKONG, April 28.—(AP)—A 30-year dream of ’round-the-world air service became reality today with the arrival of the Hongkong Clipper from Manila on the first regular flight between the two cities.

     The clipper, bridging the last 700-mile gap in the America-Asia service, placed the final link in an airplane chain whereby it is possible to encircle the world in less than a month, using scheduled commercial planes.

     The craft brought 2500 pounds of American cargo, including 100,000 letters and newspapers from the United States only six days old. The papers left Alameda, Calif., last Thursday aboard China Clipper, being transferred to the Hongkong Clipper at Manila. ¹

     A large crowd welcomed the clipper at Kaitak Airport. Included were Acting Governor N. L. Smith and representatives of all of the colony’s government and commercial activities.

     The clippers’ pilot, A. E. Laporte, and crew were escorted to a dais at the hangar, where the acting governor gave a speech of welcome.

     The plane, on its return flight on Thursday, is expected to carry 2500 pounds of cargo, including 40,000 letters.

     At a reception for the fliers, the acting governor said:

      “We are celebrating the welding of the last link in world air communication. The lessening of the physical gaps is the surest way of ending misunderstandings which have occurred between nations in the past.

“Hongkong offers congratulations, welcomes this American transpacific air service and hopes it will be another bond in the chain of goodwill.”

     Laporte said the Manila-Hongkong flight was “uneventful,” despite poor weather conditions necessitating intermittent blind flying.

Oakland Tribune, Vol. CXXVI, No. 118, Wednesday, 28 April 1937, Page 1, Column 3

The China Clipper, NC14716, was the first of three Martin M-130 four-engine flying boats built for Pan American Airways and was used to inaugurate the first commercial transpacific air service from San Francisco to Manila in November, 1935. Built at a cost of $417,000 by the Glenn L. Martin Company in Baltimore, Maryland, it first flew on 20 December 1934, and was delivered to Pan Am on October 9, 1935.

The airplane was operated by a flight crew of 6 to 9, depending on the length of the flight, plus cabin staff, and could carry 18 passengers on overnight flights or a maximum 36 passengers.

Martin M-130 China Clipper, NC14716, at Honolulu, Ohau, Hawaiian Islands. (Unattributed)
Martin M-130 China Clipper, NC14716, at Honolulu, Oahu, Hawaiian Islands. (Unattributed)

The Martin M-130 was 90 feet, 10.5 inches (27.699 meters) long with a wingspan of 130 feet, 0 inches (39.624 meters). It was 24 feet, 7 inches (7.493 meters) high. Its maximum takeoff weight was 52,252 pounds (23,701 kilograms).

The flying boat was powered by four air-cooled, supercharged, 1,829.389-cubic-inch displacement (29.978 liters) Pratt & Whitney Twin Wasp S2A5-G engines. These were two-row, 14-cylinder radial engines with a compression ratio of 6.7:1. The S2A5-G was rated at 830 horsepower at 2,400 r.p.m., and 950 horsepower at 2,550 r.p.m. for takeoff, burning 87-octane gasoline. They drove three-bladed Hamilton Standard Hydromatic constant-speed propellers through a 3:2 gear reduction. The engine was 3 feet, 11.88 inches (1.216 meters) in diameter and 4 feet, 8.75 inches (1.441 meters) long. It weighed 1,235 pounds (560 kilograms).

The airplane had a maximum speed of 180 miles per hour (290 kilometers per hour), and a cruise speed of 130 miles per hour (209 kilometers per hour). The service ceiling was 10,000 feet (3,048 meters) and its range was 3,200 miles (5,150 kilometers).

Martin M-130, NC14716, China Clipper, moored at some distant exotic locale.
Martin M-130, NC14716, China Clipper, moored at some distant exotic locale. (Unattributed)

¹ There may be confusion as to which airplane was flown from Manila to Hong Kong. Most newspapers identified it as China Clipper, while the Oakland Tribune called it Hongkong Clipper.

Pan American’s Hong Kong Clipper was a Sikorsky S-42, NC823M, which had entered service in December 1934. Many newspapers dated 28 April 1937 showed a photograph of NC832M arriving at Auckland, New Zealand, after a four-day, 7,000-mile survey flight from the United States.

Entering service in 1934, the airline had originally named the NC823M West Indies Clipper. This was changed to Pan American Clipper, and later, Hong Kong Clipper. The airplane crashed on takeoff and sank near Antilla, Cuba, 7 August 1944.

Pan American Airways System’s Sikorsky S-42, NC832M, over San Francisco Bay, 1935. (NASM SI-90-3001)

© 2020, Bryan R. Swopes