Tag Archives: First Flight

2 February 1974

General Dynamics YF-16 Fighting Falcon 72-1567, 2 February 1974. (U.S. Air Force 071202-F-9999J-029)

2 February 1974: Test pilot Philip Francis Oestricher made the first test flight of the General Dynamics YF-16 Light Weight Fighter prototype, 72-1567, at Edwards Air Force Base, California. During the 90-minute flight the airplane reached 400 knots (740.8 kilometers per hour) and 30,000 feet (9,144 meters).

A prototype General Dynamics YF-16 nears completion, 1973. (General Dynamics)

Built at Fort Worth, Texas, the prototype rolled out 13 December 1973. It was loaded aboard a Lockheed C-5A Galaxy heavy-lift transport and was flown to Edwards. During high-speed taxi tests on 20 January 1974 the YF-16 began to oscillate in the roll axis, threatening to touch the wingtips to the ground.

Philip Francis Oestricher, General Dynamics test pilot. (Photograph courtesy of Neil Corbett, Test and Research Pilots, Flight Test Engineers)

To prevent damage, Phil Oestricher lifted off to regain control and after six minutes, touched down again.

The airplane had sustained damage to the right horizontal stabilizer. Engineers determined that the airplane’s roll control was too sensitive, and that the exhaust nozzle was improperly wired, resulting in too much thrust at low throttle settings. The YF-16 was repaired and was ready for its first test flight on 2 February.

A prototype YF-16 during a test flight, March 1973. Edwards Air Force Base is visible under the airplane's left wing. (Lockheed Martin)
The first prototype YF-16, 72-1567, during a test flight, March 1974. Edwards Air Force Base is visible under the airplane’s left wing. (Lockheed Martin)

The two YF-16 prototypes competed against the Northrop YF-17 for the role of the Air Force and NATO light weight fighter program. The YF-16 was selected and single-seat F-16A and two-seat F-16B fighters were ordered. The YF-17 was developed into the U.S. Navy’s F/A-18 Hornet.

General DynamicsYF-16 72-1567 and Northrop YF-17 72-1569 prototypes. (U.S. Air Force)
Phil Oestricher in the cockpit of the first General Dynamics YF-16 Light Weight Fighter prototype at Carswell Air Force Base, Texas, December 1972.
Phil Oestricher in the cockpit of the first General Dynamics YF-16 Light Weight Fighter prototype at Carswell Air Force Base, Texas, December 1973. (Lockheed Martin)

The F-16 was designed to be a highly-maneuverable, light weight air superiority day fighter, but it has evolved into a multi-role fighter/fighter bomber with all weather attack capability.

The F-16 (now, a Lockheed Martin product) remains in production, with more than 4,600 having been built in the United States and under license in Europe. The United States Air Force had 1,017 F-16s in service as of 2021,

A U.S. Air Force F-16C Block 50D Fighting Falcon, serial number 91-0405, of the 52nd Fighter Wing, Spangdahlem Air Base, Germany. This F-16 is armed with four AIM-120 air-to-air missiles and two air-to-ground AGM-88 High-speed Anti-Radiation Missiles (HARM). It carries external fuel tanks and an electronics countermeasures unit. (U.S. Air Force)
A U.S. Air Force F-16C Block 50D Fighting Falcon, serial number 91-0405, of the 52nd Fighter Wing, Spangdahlem Air Base, Germany. This F-16 is armed with four AIM-120 air-to-air missiles and two air-to-ground AGM-88 High-speed Anti-Radiation Missiles (HARM). It carries external fuel tanks and an electronics countermeasures unit. (U.S. Air Force)

The F-16C is a single-seat, single-engine Mach 2+ fighter. It is 49.3 feet (15.03 meters) long with a wingspan of 32.8 feet (10.0 meters) and overall height of 16.7 feet (5.09 meters). It has an empty weight of 20,300 pounds (9,207.9 kilograms) and maximum takeoff weight of 48,000 pounds (21,772 kilograms).

The fighter is powered by one Pratt & Whitney F100-PW-229 or General Electric F110-GE-129 afterburning turbofan engine which produces 17,800 pounds of thrust (79.178 kilonewtons) each, or 29,100 pounds (129.443 kilonewtons) with afterburner) (F100), or 29,500 pounds (131.223 kilonewtons) (F110).

General Dynamics/Lockheed Martin F-16C Block 30H Fighting Falcon 87-0292, 121st Fighter Squadron, 113th Operations Group, District of Columbia Air National Guard (Lockheed Martin)
Lockheed Martin F-16C Block 30H Fighting Falcon 87-0292, 121st Fighter Squadron, 113th Operations Group, District of Columbia Air National Guard (Lockheed Martin)

The Fighting Falcon has a maximum speed of Mach 1.2 (913 miles per hour, or 1,470 kilometers per hour) at Sea Level, and Mach 2+ at altitude. The fighter’s service ceiling is higher than 50,000 feet (15,240 meters). Maximum range is 2,002 miles (3,222 kilometers).

The F-16C is armed with one General Electric M61A1 Vulcan 20 mm 6-barreled Gatling gun with 511 rounds of ammunition, and can carry a wide range of air-to-air and air-to-ground missiles and bombs.

The first production F-16A made its first flight December 1976. The U.S. Air Force inventory 1,017 C/D (2021) More than 4,600 have been built, serving with 25 air forces world wide.

The F-16 Block 70 remains in production at Greenville, South Carolina . Lockheed Martin has a backlog of 117 Block 72 aircraft as of 31 January 2025.

Lockheed Martin F-16 under construction at Greenville, South Carolina. (Lockheed Martin)

The first prototype YF-16, 72-1567, is now on display at the Virginia Air and Space Center, Hampton, Virginia.

The first of the two General Dynamics prototype YF-16 Fighting Falcon lightweight fighters, 72-1567, on display at the Virginia Air and Space Center, Hampton, Virginia. (Rtphokie via Wikipedia)
The first of the two General Dynamics prototype YF-16 Fighting Falcon lightweight fighters, 72-1567, on display at the Virginia Air and Space Center, Hampton, Virginia. (Rtphokie via Wikipedia)
Philip Oestricher, 1948

Philip Francis Oestricher was born at Orlando, Florida, 26 September 1931. He was the first of four children of Albert Raymond Oestricher, a chiropractor, and Henriette Hyacinthe Dodane Oestricher.

He attended Orlando High School, where he was a classmate of his future wife, Patricia Ratti. Both graduated in 1949.

Oestricher then attended the University of Florida at Gainesville, Florida, where he majored in engineering. While there, he was associate editor of Florida Engineer, and a member of the Institute of Aeronautical Sciences, Automotive Engineering Society, Sigma Tau (ΣΤ), an engineering honor society, and Phi Kappa Phi (ΦΚΦ), also an honor society. He graduated with a Bachelor of Science degree in aeronautical engineering, 8 June 1952. Oestricher continued post-graduate studies and earned a masters degree in engineering in 1953.

Miss Patricia Ratti

Philip Francis Oestricher married Miss Patricia Maria Ratti, then a senior at the University of Florida, at 10:00 a.m., 27 December 1952, in a ceremony held at the St. James Roman Catholic Church at the corner of Orange Avenue and Robinson Street, in downtown Orlando, Florida. They would eventually have four children.

Oestricher worked for the Convair Division of General Dynamics Corporation at Fort Worth, Texas, in 1953–1954.

Convair Division of General Dynamics Corporation at Fort Worth, Texas, circa 1954.

Having enlisted in the United States Marine Corps, Private First Class Oestricher entered the USMC Officer Candidate Course at Quantico, Virginia, 12 April 1954. He graduated as a Naval Aviator and was commissioned a second lieutenant in July 1954. He attended flight training at NAS Pensacola, Florida, in 1955. He continued with advanced flight training at NAS Corpus Christi, Texas, and was promoted to the rank of first lieutenant, 2 January 1956. On 27 January 1956, 1st Lieutenant Oestricher was cited as the outstanding fighter syllabus graduate from the Naval Air Advanced Training Command.

A flight of four Grumman F9F-8 Cougars of VMF(AW)-114, circa 1957. (USMC A135160)

Lieutenant Ostricher was assigned to Marine All-Weather Fighter Squadron 114 (VMF(AW)-114, “Death Dealers”) flying the Grumman F9F-8 Cougar and Douglas F4D-1 Skyray. The squadron deployed aboard the Midway-class large aircraft carrier USS Franklin D. Roosevelt (CVA-42). The carrier had just completed the SCB-110 refit and emerged with a new angled flight deck deck.

Three Douglas F4D-1 Skyrays of VMF(AW)-114, prepare to launch from USS Franklin D. Roosevelt, CVA-42. (Sgt. Harold (“Woody”) Woodrom, USMC)

Following this tour at sea, Lieutenant Oestricher left active duty, but remained in the U.S. Marine Corps Reserve, eventually rising to the rank of lieutenant colonel.

Phil Oestricher returned to Convair as an aeronautical engineer. He was assigned work on the B-58A Hustler, a Mach 2 strategic bomber; the Model 54, the U.S. Air Force NX-2 CAMAL ¹ nuclear-powered bomber prototype; and the RB-57F, a specialized strategic reconnaissance aircraft.

Artists rendering of the Convair Model 54, a proposal for the U.S. Air Force NX-2 nuclear-powered bomber. (Convair)
General Dynamics RB-57F Canberra 63-13291. (U.S. Air Force 061031-F-1234P-021)

Phil Oestricher attended the U.S. Navy Test Pilot School (Class 44) at NAS Patuxent River, Maryland, in 1966. The course included 420 classroom hours, and about 150 flight hours. Oestricher flew 15 different aircraft types. He graduated as his class’s outstanding student.

“He stood out as an exceptionally capable test pilot in all respects. We are proud to list him as a graduate of our school,” said D. Z. Skalla, acting director of USNTPS.²

“TEST PILOTS—Graduates of Class No. 44, U.S. Naval Test Pilot School, inspect F-111A close up during a recent tour of Fort Worth division. Some will be flight-testing F-111Bs in the days ahead.” Phil Oestricher is sixth from right. (General Dynamics News)

Lieutenant Colonel Oestricher commanded VMF(AW)-112, the Marine Corps’ largest reserve squadron. At the time, the squadron was flying the Chance Vought F8U Crusader. Colonel Oestricher retired from the Marine Corps in 1973.

Phil Oestricher was a design safety engineer on the General Dynamics F-111 program. As a test pilot, he flew all models of that aircraft.

He made the first flight of the F-16B 8 August 1977.

In 1979, Oestricher was awarded the Iven C. Kincheloe Award of the Society of Experimental Test Pilots for “outstanding professional accomplishment in flight testing.”

Phil Oestricher worked for General Dynamics as an engineer and test pilot for 33 years. He was the Director of Flight Test for 11 years. He retired in July 1992.

General Dynamics YF-16 LWF prototype 72-1568 with pilot, Phil Oestricher, May 1974. (Code One Magazine)

Lieutenant Colonel Philip Francis Oestricher, United States Marine Corps (Retired), died at Benbrook, Texas, 18 December 2015. He was 84 years old. His remains were interred at Woodlawn Memorial Park, Gotha, Florida.

¹ Continuous Airborne Alert, Missile Launching and Low-Level Penetration

² GENERAL DYNAMICS NEWS, Wednesday, 30 November 1966, Page 6, Column 2

© 2025, Bryan R. Swopes

27 January 1959

Convair 880 N801TW. (San Diego Air & Space Museum
Convair 880 N801TW. (San Diego Air & Space Museum pictionid74075793)

27 January 1959: The first Convair 880 takes off for its first flight at Lindbergh Field, San Diego, California. In the cockpit were Chief Engineering Test Pilot Donald Pound Germeraad, Co-pilot Philip M. Prophett, and Flight Test Engineer Bud Davies.

Germeraad and Prophett, Convair 880. (Test & Research Pilots, Flight Test Engineers)

Convair Jet Airliner In First Flight

     SAN DIEGO (UPI)—Convair’s 880 jet transport took off from Lindbergh Field today on its maiden flight.

     The sleek white and gold airplane. which its designers said is the world’s fastest commercial aircraft, used only one-half of the runway to be airborne.

     As soon as the 129-foot 880 was airborne, chief engineering test pilot Don Germeraad out the plane in a gradual turn to take it over the Pacific Ocean and away from populated areas.

     Today’s flight was scheduled to last approximately two hours.

     Convair has received orders from many major airlines for the 615-mile-per-hour 880 transport. The first 880s are expected to go into airline service in the spring of 1960.

Independant-Journal, Vol. 98, No. 263, Tuesday, 27 January 1959, Page 13, Column 3

Convair Chief Engineering Test Pilot Donald P. Germeraad. (Test & Research Pilots, Flight Test Engineers)

The Convair 880 was a four-engine, swept-wing turbojet-powered commercial airliner. It was operated by a flight crew of three and could carry up to 110 passengers. The Convair 880-22-M was a modified version of the standard 880-22, intended for shorter range operations. It had leading-edge slats, a higher maximum takeoff weight, stronger landing gear, a tail skid and an improved anti-lock braking system. The Convair 880 was so-named because its design top speed was 880 feet per second (600 miles per hour, or 966 kilometers per hour), faster than its Boeing 707 or Douglas DC-8 rivals.

The airplane was 129 feet, 4 inches (39.421 meters) long with a wingspan of 120 feet (36.576 meters) and overall height of 36 feet, 3.75 inches (11.068 meters). The 880 had an empty weight of 94,000 pounds (42,638 kilograms) and maximum takeoff weight was 191,000 pounds (86,636 kilograms).

The Convair 880-22-M was powered by four General Electric CJ805-3B turbojet engines. The CJ805-3B is a single-shaft, axial-flow turbojet with a 17-stage compressor section and 3-stage turbine, based on the military J79. The engine has a maximum continuous power rating of 9,800 pounds of thrust (43.593 kilonewtons) at Sea Level, and 11,650 pounds (51.822 kilonewtons) for Takeoff. The CJ805-3B is 9 feet, 2.4 inches (2.804 meters) long, 3 feet, 3.9 inches (1.013 meters) wide and 4 feet, 0.8 inches (1.240 meters) high. It weighs 2,875 pounds (1,304 kilograms).

The 880-22-M had a cruise speed of 0.82 Mach (556 miles per hour/895 kilometers per hour) at 30,000 feet (9,144 meters). The service ceiling was 41,000 feet (12,497 meters). Maximum range was 5,056 miles (8,137 kilometers).

The Convair Division of General Dynamics built 65 Convair 880 airliners at San Diego, California, between 1959 and 1962. Delta Air Lines retired its last one in January 1974.

The first Convair 880, N801TW, was rolled out of the Convair plant in San Diego, California, 15 December 1958. (San Diego Air & Space Museum Catalog #: 01_00083015)

N801TW rolled out of the Convair plant in San Diego, 15 December 1958. It was issued a type certificate by the Federal Aviation Administration on 14 July 1961. The 880 entered commercial service with Trans World Airways 19 July 1961. The airliner was withdrawn from use 14 July 1974 and stored at Kansas City International Airport (MCI). It was deregistered 1 July 1977.

Donald Pound Germeraad was born 18 July 1921 in Yellowstone County, Montana. He was the second of seven children of John Henry Germeraad, a farmer, and Jane Holland Blake Germeraad.

Don Germeraad graduated from the Billings Polytechnic Institute, Billings, Montana, with a degree in Mechanical Engineering in 1941.

Donald P. Germeraad, 1942. (Slipstream Mk II 1942)

On 13 August 1941. Germeraad enlisted in the United States Navy as a Seaman 2c (V-5 Program) at Seattle, Washington (510-09-10). He was sent to the Naval Reserve Aviation Base at Seattle for Indoctrinal Training, and then to NAS Corpus Christi, Texas for flight training.

On completion of flight training, Germeraad was commissioned as an ensign, United States Naval Reserve, 25 March 1942.

He was promoted to lieutenant, USNR, 1 April 1944.

Esther Pietrina Aspesi (Simmons College)

Lieutenant Germeraad married Lieutenant (j.g.) Esther Pietrina Aspesi, Nurse Corps, United States Navy, at Compton, California, 6 March 1946. Miss Simmons had attended Brighton High Cchool, Brighton, Massachussetts, and was a 1943 graduate of Simmons College School of Nursing. During World War II, Lieutenant Aspesi had been a member of the Navy’s Flight Evacuation Unit, serving at Guam, Iwo Jima and Okinawa.

Lieutenant Germeraad was promoted to the rank of lieutenant commander, USNR, 1 June 1946. In 1947, he was the commanding officer of VR-54, based at NAS Los Alamitos, California.

Germeraad graduated from Massachusetts Institute of Technology (MIT), with a Bachelor’s Degree in Aeronautical Engineering, 17 June 1950. He was awarded the Webb Salisbury Memorial Award for outstanding work in aeronautical engineering.

First flight of the Convair XP5Y-1 Tradwewind, San
First flight of the Convair XP5Y-1 Tradewind, Bu. No. 121455, San Diego Bay, California, 18 April 1950. (Naval History and Heritage Command 80-G-413610)

Lieutenant Commander Germeraad was awarded the Air Medal, 30 September 1952. He was Promoted to commander, USNR, 1 July 1954

Don Germeraad served Chief Engineering Test Pilot for Convair, 1947–1962; and chief, crew performance, 1962–1966. He made the first flights of the 240 Turboliner, 16 March 1947; XP5Y-1 Tradewind, 18 April 1950; R3Y-1, 22 February 1954; the 880; and the 990, 24 January 1961. He also flew the XF2Y-1 Sea Dart.

Donald P. Germeraad waves from the cockpit of a Convair 990. (Billings Gazette)

Commander Germeraad was promoted to Captain, United States Naval Reserve, 1 April 1962.

In 1966, he served as a member of the board of directors of the American Institute of Aeronautics and Astronautics.

After leaving Convair, Germeraad served as Manager, Ocean Systems Program Development, Lockheed Missiles & Space Company, Sunnyvale, California 1966–1969, which was developing the Deep Submergence Search Vehicle (DSSV).

Ocean Chief Named by Lockheed

     SUNNYVALE, Calif.—Donald P. Germeraad has joined Lockheed Missiles & Space Co. as manager of advanced ocean programs, the company has announced.

     A veteran of more than 26 years in the aerospace industry, a former chief engineering test pilot and a graduate student with highest honors from MIT, Germeraad has held managerial positions in life sciences and crew systems and has been the operator and test consultant on deep-diving research submersibles.

     At Lockheed, Germeraad will direct design studies for advanced ocean systems concepts. He will manage research and development efforts involving conceptual design and systems analysis studies of advanced ocean systems, supporting technology programs and the integration of associated subsystems and support equipment. He reports to James G. Wenzel, manager of the ocean systems organization.

     “EXAMPLES of some of the more challenging projects which we are aggressively pursuing,” Germeraad noted, “are technology extensions of our Deep Quest submarine and Deep Submergence Rescue Vehicle (DSRV), advanced structures and materials, underwater imaging systems,  and submerged hydraulic and electrical components, to mention but a few. These are all important considerations for the Deep Submergence Search Vehicle (DSSV),” which would be the follow-on to the rescue vehicle.

Orlando Sentinel, Vol. 82, No. 205, Sunday, 4 December 1966, Page 5-C, Column 7

DSRV-1, 24 January 1970. (NavSource)

Director test operations space program 1969–1972

Masters Degree in Systems Management, University of Southern California, 1971

Program Manager high speed ships, 1972–1976

Director-manager ocean system program development 1976–1983

Captain Germeraad retired from the United States Naval Reserve, July 1972.

Donald Pound Germeraad died 11 May 1992 in Mulnomah County, Oregon. His remains were interred at Fort Rosecrans National Cemetery, Plot MU 0 49, San Diego, California.

© 2023, Bryan R. Swopes

27 January 1939

Lockheed XP-38 Lightning 37-457 at March Field, Riverside County, California, January 1939. (San Diego Air and Space Museum)
Lockheed XP-38 Lightning 37-457, 22 May 1941. (San Diego Air and Space Museum Archive)

27 January 1939: First Lieutenant Benjamin Scovill Kelsey, Air Corps, United States Army, made the first flight of the prototype Lockheed XP-38 Lightning, serial number 37-457, at March Field, Riverside County, California.

This was a short flight. Immediately after takeoff, Kelsey felt severe vibrations in the airframe. Three of four flap support rods had failed, leaving the flaps unusable.

1st Lieutenant Benjamin Scovill Kelsey, Air Corps, United States Army, 1937.

Returning to March Field, Kelsey landed at a very high speed with a 18° nose up angle. The tail dragged on the runway. Damage was minor and the problem was quickly solved.

Designed by an engineering team led by Hall L. Hibbard, which included the legendary Clarence L. “Kelly” Johnson, the XP-38 was a single-place, twin-engine fighter designed for very high speed and long range. It was an unusual configuration with the cockpit and armament in a center nacelle, with two longitudinal booms containing the engines and propellers, turbochargers, radiators and coolers. The Lightning was equipped with tricycle landing gear. The nose strut retracted into the center nacelle and the two main gear struts retracted into bays in the booms. To reduce drag, the sheet metal used butt joints with flush rivets.

The prototype had been built built at Lockheed’s factory in Burbank, California. On the night of 31 December 1938/1 January 1939, it was transported to March Field aboard a convoy of three trucks. Once there, the components were assembled by Lockheed technicians working under tight security.

Lockheed XP-38 Lightning 37-457. (San Diego Air and Space Museum)
Lockheed XP-38 Lightning 37-457. (San Diego Air and Space Museum Archive)
Lockheed XP-38 Lightning 37-457. (San Diego Air and Space Museum Archive)
Left profile, Lockheed XP-38 Lightning 37-457. (U.S. Air Force)
Left profile, Lockheed XP-38 Lightning 37-457. (U.S. Air Force)
Lockheed XP-38 Lightning 37-457

The XP-38 was 37 feet, 10 inches (11.532 meters) long with a wingspan of 52 feet (15.850 meters) and overall height of 12 feet, 10 inches (3.952 meters). Its empty weight was 11,507 pounds (5,219.5 kilograms). The gross weight was 13,904 pounds (6,306.75 kilograms) and maximum takeoff weight was 15,416 pounds (6,992.6 kilograms).

The Lightning was the first production airplane to use the Harold Caminez-designed, liquid-cooled, supercharged, 1,710.60-cubic-inch-displacement (28.032 liter) Allison Engineering Company V-1710 single overhead cam 60° V-12 engines. When installed on the P-38, these engines rotated in opposite directions. The XP-38 used a pair of experimental C-series Allisons, with the port V-1710-C8 (V-1710-11) engine being a normal right-hand tractor configuration, while the starboard engine, the V-1710-C9 (V-1710-15), was a left-hand tractor. Through a 2:1 gear reduction, these engines drove the 11-foot (3.353 meters) diameter, three-bladed Curtiss Electric variable-pitch propellers inward to counteract the torque effect of the engines and propellers. (Viewed from the front of the airplane, the XP-38’s starboard propeller turned clockwise, the port propeller turned counter-clockwise. The direction of rotation was reversed in the YP-38 service test prototypes and production P-38 models.) The engines have long propeller gear drive sections to aid in streamlining aircraft, and are sometimes referred to as “long-nose Allisons.”

The V-1710-11 and -15 had a compression ratio of 6.65:1. They had a continuous power rating of 1,000 horsepower at 2,600 r.p.m. at Sea Level, and 1,150 horsepower at 2,950 r.p.m. for takeoff. The combination of a gear-driven supercharger and an exhaust-driven General Electric B-1 turbosupercharger allowed these engines to maintain their rated power levels to an altitude of 25,000 feet (7,620 meters).

The -11 and -15 were 7 feet, 10.46 inches (2.399 meters) long. The -11 was 3 feet, 6.59 inches (1.082 meters) high and 2 feet, 4.93 inches (0.7348 meters) wide. It weighed 1,300 pounds (589.7 kilograms). The -15 was 3 feet, 4.71 inches (1.034 meters) high, 2 feet, 4.94 inches (0.7351 meters) wide, and weighed 1,305 pounds (591.9 kilograms).

A 1939 Allison Engine Company V-1710-33 liquid-cooled, supercharged SOHC 60° V-12 aircraft engine at the Smithsonian Institution National Air and Space Museum. This engine weighs 1,340 pounds (607.8 kilograms) and produced 1,040 horsepower at 2,800 r.p.m. During World War II, this engine cost $19,000. (NASM)
A 1939 Allison Engine Company V-1710-33 liquid-cooled, supercharged SOHC 60° V-12 aircraft engine at the Smithsonian Institution National Air and Space Museum. This engine weighs 1,340 pounds (607.8 kilograms) and produced 1,040 horsepower at 2,800 r.p.m. During World War II, this engine cost $19,000. (NASM)

The XP-38 had a maximum speed of 413 miles per hour (664.66 kilometers per hour) at 20,000 feet (6,096 meters) and a service ceiling of 38,000 feet (11,582.4 meters).

The XP-38 was unarmed, but almost all production Lightnings carried a 20 mm auto cannon and four Browning .50-caliber machine guns grouped together in the nose. They could also carry bombs or rockets and jettisonable external fuel tanks.

Lockheed XP-38 37-457. (San Diego Air and Space Museum Archive)
Lockheed XP-38 37-457. (San Diego Air and Space Museum Archive)

The prototype XP-38 was damaged beyond repair when, on approach to Mitchel Field, New York, 11 February 1939, both engines failed to accelerate from idle due to carburetor icing. Unable to maintain altitude, Lieutenant Kelsey crash landed on a golf course and was unhurt.

Testing continued with thirteen YP-38A pre-production aircraft and was quickly placed in full production. The P-38 Lightning was one of the most successful combat aircraft of World War II. By the end of the war, Lockheed had built 10,037 Lightnings.

Lockheed test pilot Tony LeVier in the cockpit of P-38J-10-LO Lightning 42-68008. (Lockheed Martin)

© 2019, Bryan R. Swopes

25 January 1946

Jack Valentine Woolams, Chief Experimental Test Pilot, Bell Aircraft Corporation. (John Trudell/Ancestry)

25 January 1946:¹ Near Pinecastle Army Airfield in central Florida, Bell Aircraft Corporation Senior Experimental Test Pilot Jack Woolams made the first unpowered glide flight of the XS-1 supersonic research rocketplane, 46-062.

46-062 was the first of three XS-1 rocketplanes built by Bell for the U.S. Army Air Corps and the National Advisory Committee for Aeronautics (NACA) to explore flight at speeds at and beyond Mach 1, the speed of sound. The airplane had been rolled out of Bell’s plant at Buffalo, New York, on 27 December 1945. The rocket engine, which was being developed by Reaction Motors, Inc., at Franklin Lakes, New Jersey, was not ready, so the experimental aircraft was carrying ballast in its place for the initial flight tests.

Jack Woolams with the second Bell XS-1, 46-063. (Niagara Aerospace Museum)

The XS-1 was to be air-dropped from altitude by a modified heavy bomber so that its fuel could be used for acceleration to high speeds at altitude, rather than expended climbing from the surface. Bell manufactured B-29B Superfortresses at its Atlanta, Georgia, plant and was therefore very familiar with its capabilities. A B-29, 45-21800, was selected as the drop ship and modified to carry the rocketplane in its bomb bay.

Boeing B-29-96-BW Superfortress 45-21800 carries a Bell XS-1 rocketplane. (Bell Aircraft Museum)

Pinecastle Army Airfield was chosen as the site of the first flight tests because it had a 10,000 foot (3,048 meter) runway and was fairly remote. There was an adjacent bombing range and the base was a proving ground for such aircraft as the Consolidated B-32 Dominator. (Today, Pinecastle A.A.F. is known as Orlando International Airport, MCO.)

Bell XS-1 46-062 was placed in a pit at Pinecastle A.A.F. so that the B-29 drop ship in the background could be positioned over it. (NASA)
Bell XS-1 46-062 was placed in a pit at Pinecastle A.A.F. so that the B-29 drop ship in the background could be positioned over it. (NASA)

The B-29 carrying the XS-1 took off from Pinecastle at 11:15 a.m., and began its climb to altitude. Woolams was in the forward crew compartment. As the bomber reached approximately 10,000 feet (3,048 meters), he entered the bomb bay and climbed down into the cockpit of the research aircraft. At the drop altitude, the B-29 was flying at 180 miles per hour (290 kilometers per hour) with the inboard propellers feathered and flaps lowered to 20°.

The XS-1 dropped away smoothly. Woolams flew the rocketplane to a maximum 275 miles per hour (443 kilometers per hour), indicated air speed, during this first glide test. He described the rocketplane as, “solid as a rock, experiencing absolutely no vibration or noise. At the same time, it felt as light as a feather during maneuvers due to the lightness, effectiveness and nice balance between the controls.” Woolams described the visibility from the cockpit as “not good, but adequate.”

The duration of the first glide flight was about ten minutes. Woolams misjudged his approach to Pinecastle and landed slightly short of the runway, on the grass shoulder, but the XS-1 was not damaged.

The conclusion of Woolams’ flight report is highly complementary of the experimental airplane:

11.  Of all the airplanes the writer has flown, only the XP-77 and the Heinkel 162 compare with the XS-1 for maneuverability, control relationship, response to control movements, and lightness of control forces. Although these impressions were rather hastily gained during a flight which lasted only 10 minutes, it is the writer’s opinion that due to these factors and adding to them the security which the pilot feels due to the ruggedness, noiselessness, and smoothness of response of this airplane, it is the most delightful to fly of them all.

—PILOT’S REPORT, Flight 1, by Jack Woolams

Jack Woolams made ten glide flights with 46-062, evaluating its handling characteristics and stability. The aircraft was returned to Bell to have the rocket engine installed, and it was then sent to Muroc Army Airfield in the high desert of southern California for powered flight tests. (Muroc A.A.F. was renamed Edwards Air Force Base in 1949.)

Bell XS-1 46-062 was later named Glamorous Glennis by its military test pilot, Captain Charles E. Yeager, U.S. Army Air Corps. On 14 October 1947, Chuck Yeager flew it to Mach 1.06 at 13,115 meters (43,030 feet). Today the experimental aircraft is on display at the Smithsonian Institution National Air and Space Museum.

The Bell XS-1, later re-designated X-1, was the first of a series of rocket-powered research airplanes which included the Douglas D-558-II Skyrocket, the Bell X-2, and the North American Aviation X-15, which were flown by the U.S. Air Force, U.S. Navy, NACA and its successor, NASA, at Edwards Air Force Base to explore supersonic and hypersonic flight and at altitudes to and beyond the limits of Earth’s atmosphere.

An X-1 under construction at teh Bell Aircraft Corporation plant, Buffalo, New York. (Bell Aircraft Corporation)
An X-1 under construction at the Bell Aircraft Corporation plant, Buffalo, New York. (Bell Aircraft Corporation)

The X-1 has an ogive nose, similar to the shape of a .50-caliber machine gun bullet, and has straight wings and tail surfaces. It is 30 feet, 10.98 inches (9.423 meters) long with a wing span of 28.00 feet (8.534 meters) and overall height of 10 feet, 10.20 inches (3.307 meters).

46-062 was built with a thin 8% aspect ratio wing, while 46-063 had a 10% thick wing. The wings were tapered, having a root chord of 6 feet, 2.2 inches (1.885 meters) and tip chord of 3 feet, 1.1 inches (0.942 meters), resulting in a total area of 130 square feet (12.1 square meters). The wings have an angle of incidence of 2.5° with -1.0° twist and 0° dihedral. The leading edges are swept aft 5.05°.

The horizontal stabilizer has a span of 11.4 feet (3.475 meters) and an area of 26.0 square feet (2.42 square meters). 062’s stabilizer has an aspect ratio of 6%, and 063’s, 5%.

The fuselage cross section is circular. At its widest point, the diameter of the X-1 fuselage is 4 feet, 7 inches (1.397 meters).

46-062 had an empty weight is 6,784.9 pounds (3,077.6 kilograms), but loaded with propellant, oxidizer and its pilot with his equipment, the weight increased to 13,034 pounds (5,912 kilograms).

The X-1 was designed to withstand an ultimate structural load of 18g.

Front view of a Bell XS-1 supersonic research rocketplane at the Bell Aircraft plant, Buffalo, New York. (Bell Aircraft Museum)

The X-1 was powered by a four-chamber Reaction Motors, Inc., 6000C4 (XLR11-RM-3 ) rocket engine which produced 6,000 pounds of thrust (26,689 Newtons). This engine burned a 75/25 mixture of ethyl alcohol and water with liquid oxygen. Fuel capacity is 293 gallons (1,109 liters) of water/alcohol and 311 gallons (1,177 liters) of liquid oxygen. The fuel system was pressurized by nitrogen at 1,500 pounds per square inch (103.4 Bar).

The X-1 was usually dropped from the B-29 flying at 30,000 feet (9,144 meters) and 345 miles per hour (555 kilometers per hour). It fell as much as 1,000 feet (305 meters) before beginning to climb under its own power.

The X-1’s performance was limited by its fuel capacity. Flying at 50,000 feet (15,240 meters), it could reach 916 miles per hour (1,474 kilometers per hour), but at 70,000 feet (21,336 meters) the maximum speed that could be reached was 898 miles per hour (1,445 kilometers per hour). During a maximum climb, fuel would be exhausted as the X-1 reached 74,800 feet (2,799 meters). The absolute ceiling is 87,750 feet (26,746 meters).

Bell X-1 46-062 on the dry lake bed at Muroc Army Airfield, circa 1947. (NASM)

The X-1 had a minimum landing speed of 135 miles per hour (217 kilometers per hour) using 60% flaps.

There were 157 flights with the three X-1 rocket planes. The number one ship, 46-062, Glamorous Glennis, made 78 flights. On 26 March 1948, with Chuck Yeager again in the cockpit, it reached reached Mach 1.45 (957 miles per hour/1,540 kilometers per hour) at 71,900 feet (21,915 meters).

The third X-1, 46-064, made just one glide flight before it was destroyed 9 November 1951 in an accidental explosion.

The second X-1, 46-063, was later modified to the X-1E. It is on display at the NASA Dryden Research Center at Edwards Air Force Base. Glamorous Glennis is on display at the Smithsonian Institution National Air and Space Museum, next to Charles A. Lindbergh’s Spirit of St. Louis.

Bell X-1, 46-062, Glamorous Glennis, on display at the National Air and Space Museum, Washington, D.C. (NASM)
Bell X-1 46-062, Glamorous Glennis, on display at the National Air and Space Museum, Washington, D.C. (NASM)

Jack Valentine Woolams was born on Valentine’s Day, 14 February 1917, at San Francisco, California. He was the second of three children of Leonard Alfred Woolams, a corporate comptroller, and Elsa Mathilda Cellarius Woolams. He grew up in San Rafael, California, and graduated from Tamalpais School in 1935.

Jack Woolams, 1941

After two years of study at The University of Chicago, in 1937 Woolams entered the Air Corps, U.S. Army, as an aviation cadet. He trained as a pilot at Kelly Field, San Antonio, Texas. On graduation, 16 June 1938, he was discharged as an aviation cadet and commissioned as a second lieutenant, Air Reserve. He was assigned to Barksdale Army Air Field, Louisiana, where he flew the Boeing P-26 and Curtiss P-36 Hawk.

On 10 February 1939, Lieutenant Woolams was one of three Air Corps officers thrown into the waters of Cross Lake, near Shreveport, Louisiana, when the boat, owned by Woolams, capsized in 4 foot (1.2 meters) waves. Woolams and Lieutenant J.E. Bowen were rescued after 4 hours in the water, but the third man, Lieutenant Wilbur D. Camp, died of exposure.

Lieutenant Woolams transferred from active duty to inactive reserve status in September 1939 in order to pursue his college education at The University of Chicago, where he was a member of the Alpha Delta Phi (ΑΔΦ) fraternity. While at U. of C., he played on the university’s football and baseball teams, and was a member of the dramatic society. Woolams graduated 18 July 1941 with a Bachelor of Arts (A.B.) degree in Economics.

Mr. and Mrs. Jack V. Woolams, 16 June1941. (Unattributed)

Jack Woolams married Miss Mary Margaret Mayer at the bride’s home in Riverside, Illinois, 16 June 1941. They would have three children. Miss Mayer was also a 1941 graduate from the University of Chicago. She had been Woolams’ student in the Civilian Pilot Training Program.

Woolams became a production test pilot for the Bell Aircraft Corporation at Buffalo, New York. He tested newly-built Bell P-39 Airacobra fighters. As he became more experienced, he transitioned to experimental testing with the P-39, P-63 King Cobra, and the jet-powered P-59 Airacomet.

Jack Valentine Woolams, Chief Experimental Test Pilot, Bell Aircraft Corporation, circa 1946. (Niagara Aerospace Museum)

On 28 September 1942, Jack Woolams flew a highly-modified Bell P-39D-1-BE Airacobra, 41-38287, from March Field, near Riverside, California, to Bolling Field, Washington, D.C., non-stop. The duration of the flight was approximately 11 hours. The modifications were intended to allow P-39s to be flown across the Pacific Ocean to Hawaii and on to the Soviet Union for delivery under Lend Lease.

During the summer of 1943, Woolams flew the first Bell YP-59A Airacomet, 42-108771, to an altitude of 47,600 feet (14,508 meters) near Muroc Army Air Field in California.

On 5 January 1945, Woolams was forced to bail out of a Bell P-59A-1-BE, 44-22616. He suffered a deep laceration to his head as he left the airplane. He lost his flight boots when the parachute opened, and on landing, had to walk barefoot through knee-deep snow for several miles to reach a farm house. The deep snow prevented the company’s ambulance from getting to Woolams. Bell Aircraft president Lawrence D. Bell sent the company’s second prototype Bell Model 30 helicopter, NX41868, flown by test pilot Floyd Carlson, to transport a doctor, J.A. Marriott, M.D., to the location. Another Bell test pilot, Joe Mashman, circled overhead in a P-63 King Cobra to provide a communications link. Later in the day, an ambulance was able to get through the snow to take Woolams to a hospital.

Wreckage of Bell P-59A-1-BE Airacomet 44-22616. Jack Woolams bailed out of this airplane 5 January 1945. (Niagara Aerospace Museum)

Woolams was scheduled to make the first powered flight of the XS-1 during October 1946.

Jack Woolams was killed Friday, 30 August 1946, when his red Thompson Trophy racer, Cobra I, a modified 2,000-horsepower Bell P-39Q Airacobra, crashed into Lake Ontario at over 400 miles per hour. His body was recovered by the U.S. Coast Guard four days later.

Bell Aircraft Corporation experimental test pilots Jack Woolams and Tex Johnston with their modified Bell P-39Q Airacobras, Cobra I and Cobra II. (Niagara Aerospace Museum)

¹ This article was originally dated 19 January 1946. There were known discrepancies as to the date of the first flight from various reliable sources. Recently discovered test flight reports, provided to TDiA by Mr. Roy T. Lindberg, Historian of the Niagara Aerospace Museum, Niagara Falls, New York, have confirmed that the date of the first flight was actually 25 January 1946. The article has been been revised accordingly, as well as to incorporate new information from these reports.

TDiA is indebted to Mr. Lindberg for providing this and other documentation.

© 2019, Bryan R. Swopes

24 January 1975

Aérospatiale SA 365 C Dauphin 2, F-WVKE. (Vertical Flight Society)

24 January 1975: First flight Aérospatiale SA 365 C Dauphin 2 prototype, F-WVKE, s/n 004. This prototype was built from a single engine SA 360 C Dauphin.

The SA 365 C is a single main rotor/fenestron twin-engine medium helicopter. It is operated by a single pilot seated in the right seat, and can carry a maximum of 13 passengers. The four-bladed articulated main rotor has a diameter of 11.68 meters (38.31 feet) and turns clockwise as seen from above. (The advancing blade is on the left.) A 0.89 meter (2.95 feet), 13-bladed fenestron provides anti-torque and yaw control.¹ In 1977, a Star Flex rigid rotor hub replaced the articulated main rotor.

The fuselage is 10.98 meters (36.02 feet) long, 3.17 meters (10.40 feet) wide and 3.27 meters (10.72 feet) high. In the original configuration, the Dauphin 2 had fixed wheeled landing gear. The second prototype was used to experiment with retractable tricycle gear, which was adopted with the SA 365 N.

Aérospatiale SA 365 C Dauphin 2, F-WVKE. (Vertical Flight Society)

The SA 365 C was powered by two Turboméca Arriel 1A turboshaft engines. These had a maximum continuous power rating of 430 kW (577 h.p.) @ 50,764 r.p.m.; 466 kW (625 h.p.) for take off (5-minute limit) @ 52,007 r.p.m./or one engine inoperative (30-minute limit); and 486 kW (652 h.p.) @ 52,680 r.p.m., one engine inoperative,  2½-minute limit.

The main rotor turns 350 r.p.m. (+/- 10) in normal operation. The minimum transient speed to 285 r.p.m., is allowed in case of engine failure, and 320–420 r.p.m. during autorotation.

The helicopter’s maximum mass is 3,400 kilograms (7,496 pounds, maximum gross weight). Its maximum speed (VNE)  is 315 kilometers per hour (170 knots), and maximum operating altitude, 4,572 meters (15,000 feet). Fuel capacity is 640 liters (3 liters are unusable).

Fifty SA 365 C and C1 helicopters were built before being replaced by the SA 365 N Dauphin.

¹ The ducted fenestron is more effective than a conventional tail rotor, provides less drag in forward flight, and is safer when operating near the ground.

© 2022, Bryan R. Swopes