Tag Archives: Orville Wright

17 May 1942

Aviation, , , , , , , , , , , , ,
Sikorsky XR-4 41-18874 at Wright Field, Ohio, 17 May 1942. (Sikorsky Historical Archives)
Vought-Sikorsky XR-4 41-18874 at Wright Field, Ohio, 17 May 1942. (Sikorsky Historical Archives)
The Sikorsky XR-4 41-18874 at Wright Field, 17 May 1942. Left to right: E. Walsh, A. Planefisch, Igor Sikorsky, Orville Wright, R. Alex, Les Morris, B. Labensky. (Sikorsky Archives)

17 May 1942: After a 761 mile (1,224.7 kilometer) flight over five days, test pilot Charles Lester (“Les”) Morris and Igor Sikorsky arrived at Wright Field, Dayton, Ohio, to deliver the U.S. Army’s first helicopter, the Vought-Sikorsky XR-4. Morris hovered directly up to the base administration building and landed there. He and Sikorsky were greeted by a large group of people which included Lieutenant Colonel Hollingsworth Franklin (“Frank”) Gregory, the Army’s designated rotorcraft expert, and pioneer aviator Orville Wright.

From the Sikorsky factory at Stratford, Connecticut, to Wright Field, Ohio, was 761 miles (1,224.7 kilometers), direct. Because of the XR-4’s low speed and short range (weight limitations restricted the quantity of gasoline it could carry) the distance was covered in sixteen separate flights with a total flight time of 16 hours, 10 minutes. The longest single flight lasted 1 hour, 50 minutes, a new world’s record for helicopter flight endurance. Igor Sikorsky joined Les Morris for the final leg of the flight.

Sikorsky test pilot Charles Lester (“Les”) Morris in the cockpit of an earlier version of the Vought-Sikorsky VS-300. (Hans Groenhoff Photographic Collection, Smithsonian Institution National Air and Space Museum NASM-HGC-1408)

The Vought-Sikorsky VS-316A (which was designated XR-4 by the U.S. Army Air Corps and assigned serial number 41-18874), established the single main rotor/anti-torque tail rotor configuration. It was a two-place helicopter with side-by-side seating and dual flight controls. The fabric-covered three-blade main rotor was 38 feet (11.582 meters) in diameter and turned counter-clockwise as seen from above. (The advancing blade is on the helicopter’s right). The three-blade tail rotor was mounted to the right of the tail boom in a tractor configuration, and rotated clockwise when seen from the helicopter’s left side. (The advancing blade was below the axis of rotation.)

The XR-4 was 33 feet, 11.5 inches (10.351 meters) long and 12 feet, 5 inches (3.785 meters) high. It weighed 2,010 pounds (911.7 kilograms) empty and the maximum gross weight was 2,540 pounds (1,152.1 kilograms).

The VS-316A had originally been powered by a 499.8-cubic-inch-displacement (8.19 liter) air-cooled Warner Aircraft Corporation Scarab SS-50 (R-500-1) seven-cylinder radial engine, rated at 145 horsepower at 2,050 r.p.m. In the XR-4 configuration, the engine was upgraded to an air-cooled, direct-drive 555.298-cubic-inch-displacement (9.100 liter) Warner Super Scarab SS185 (R-550-3) seven-cylinder radial engine with a compression ration of 6.20:1. The R-550-3 was rated at 185 horsepower at 2,175 r.p.m. at Sea Level, and 200 horsepower at 2,475 r.p.m (five minute limit) for takeoff. The engine was placed backwards in the aircraft with the propeller shaft driving a short driveshaft through a clutch to a 90° gear box and the transmission. The R-550-3 weighed 344 pounds (156 kilograms).

The XR-4 was redesignated XR-4C. This would be the world’s first production helicopter. It is at the Steven F. Udvar-Hazy Center of the Smithsonian National Air and Space Museum.

Vought-Sikorsky XR-4C 41-18874 at the National Air and Space Museum. (NASM)

© 2019, Bryan R. Swopes

14 May 1908

Aviation, , , , , , ,
Charles William Furnas (1880–1941). (Wright-Brothers.org)

14 May 1908: Charles William Furnas, a mechanic for the Wright Company, was the first passenger to fly aboard an airplane.

At the Kill Devil Hills, Kitty Hawk, North Carolina, Furnas rode aboard the Wright Flyer III with Wilbur Wright as pilot. The flight covered approximately 600 meters (656 yards) and lasted for 29 seconds. Later the same day, Orville Wright flew the airplane, again with Charley Furnas aboard, this time covering 2.125 miles (3.42 kilometers) in 4 minutes, 2 seconds.

The Wright Flyer III at Kill Devil Hills, 1908. (Wright-Brothers.org)

Charles William Furnas was born at Butler Township, Montgomery County, Ohio, 20 December 1880. He was the second of three sons of Franklin Reeder Furnas, a farmer, and Elizabeth J. Rutledge Furnas.

Furnas enlisted in the United States Navy at Dayton, Ohio, 15 November 1902, and was discharged at New York City, 14 November 1906.

Furnas, a machinist, married Miss Lottie Martha Washington, 3 June 1913.

Mrs. Furnas died 1 January 1931. On 30 January 1931, Charles Furnas was admitted to a Veterans Administration Facility in Jefferson Township, Montgomery County, Ohio, where he would remain for the rest of his life.

Charles Furnas died at the Veterans Administration Hospital, Dayton, Ohio, at 9:00 a.m., 15 October 1941. His remains were interred at the Woodland Cemetery and Arboretum, Dayton.

© 2018, Bryan R. Swopes

26 April 1944

Aviation, , , ,
Lockheed C-69 Constellation 43-10310, at Wright Field, Dayton, Ohio, 26 April 1944. (McMahan Photographic Archive)

26 April 1944: The first production Lockheed C-69 Constellation, 43-10310, landed at Wright Field, Dayton, Ohio, shortly after 2:00 p.m. The crew were Lieutenant Colonel George A. Hatcher, Material Command Project Engineer, and Lieutenant Colonel Clarence A. Shoop, Materiel Command resident inspector at Lockheed Burbank in California.

Orville Wright on a ladder entering a Lockheed Constellation airplane at Wright Field. 4-26-1944 (Digital Services Department; Wright State University Libraries)

Orville Wright was present to see the airplane. After a tour, he was invited to stay aboard as a passenger. The flight was planned for 15 minutes, but the actual duration was 50 minutes.

Cololnel Hatcher invited Wright to take the right seat and to handle the controls. Wright was reluctant but did so and grinned. While Hatcher climbed out of the left seat so that Brigadier General Franklin Otis Carroll could take his position, Wright continued to fly the Constellation. It was the first time in 25 years that he had piloted an airplane.

After the flight, Wright said, “It was absolutely marvelous. . . You can say that I ran the whole thing. Put exclamation points and question marks around that—because all I had to do was just let it take care of itself. . . I enjoyed every minute. I guess a ran the whole plane for a minute. But I let the machine take care of itself. I always said airplanes would fly them selves if you left them alone.”

Orville Wright, inventor of the airplane, grins as he sits at the co-pilot’s controls of the Lockheed C-69 Constellation during a 50-minute flight from Wright Field, Dayton, Ohio, 26 April 1944. (jack-frye.blogspot.com)

“It’s a fine plane. . . it [the flight] was really fine.”

Orville Wright and Brigadier General Franklin Otis Carroll, Materiel Command, with the Lockheed C-69 Constellation at Wright Field, Dayton, Ohio, 26 April 1944. (Digital Services Department; Wright State University Libraries)

Later the C-69 was flown to Dayton Army Air Base at Vandalia, Ohio, for testing and crew training.

© 2023, Bryan R. Swopes