27 October 2015: The first flight of the Sikorsky CH-53K King Stallion Engineering Development Model–1, Bu. No. 169019, at West Palm Beach, Florida. In the cockpit was Stephen McCulley, Chief Experimental Test Pilot for Sikorsky. During the 30 minute flight, the new helicopter demonstrated sideward, rearward and forward flight while remaining in in-ground-effect hover.

Up to this point, the helicopter had completed about 200 hours of “turn-time,” or ground testing, with engines running..

Three more aircraft will join the test fleet for a planned 2,000 hour flight test program.

The fuselage of the CH-53K King Stallion is 73 feet, 1.5 inches (22.289 meters) long and its width is 9 feet, 10 inches (2.997 meters). The maximum width, across the sponsons, is 17 feet, 6 inches (5.334 meters). The seven-bladed main rotor has a diameter of 79 feet (24.079 meters). The four-blade tail rotor is 20 feet (6.096 meters) in diameter. The tail rotor is tilted 20° to the left. With rotors turning, the helicopter has an overall length of 99 feet (30.175 meters), and height of 28 feet, 4.9 inches (8.659 meters). The helicopter’s maximum gross weight is 88,000 pounds (39,916 kilograms).

Power is supplied by three General Electric T408-GE-400 engines which produce 7,500 shaft horsepower, each. The engine has digital electronic controls. The T408 has a 6-stage compressor section (5 axial-flow stages, 1 centrifugal-flow stage) and – stage turbine section (2 high- and 3 low-pressure stages). The engine is 57.5 inches (1.461 meters) long and 27 inches (0.686 meters) in diameters.

At Sea Level with maximum continuous power, the CH-53K cruises at 158 knots (182 miles per hour/293 kilometers per hour). It can hover out of ground effect at Sea Level at its maximum gross weight. The helicopter’s service ceiling is 16,000 feet (4,877 meters).

The first production CH-53K was delivered to the U.S. Marine Corps on 16 May 2018, at West Palm Beach, Florida.

© 2018, Bryan R. Swopes