27 October 1918

Wing Commander William George Barker, VC, DSO and Bar, MC and two Bars, Royal Air Force, Angleterre, 1918. (Library and Archives Canada)
Wing Commander William George Barker, V.C., D.S.O. and Bar, M.C. and Two Bars, Royal Air Force, England, 1918. (Swaine / Bibliothèque et Archives Canada / PA-122516)

Screen Shot 2015-12-21 at 09.15.01 Air Ministry,

30th November, 1918.

     His Majesty the KING has been graciously pleased to confer the Victoria Cross on the undermentioned Officers of the Royal Air Force, in recognition of bravery of the highest possible order :—

     Capt. (A./Major) William George Barker, D.S.O., M.C., No. 201 Sqn., R.A. Force.

     On the morning of 27th October, 1918, this officer observed an enemy two-seater over Fôret de Mormal. He attacked this machine, and after a short burst it broke up in the air. At the same time a Fokker biplane attacked him, and he was wounded in the right thigh, but managed despite this, to shoot down the enemy aeroplane in flames.

     He then found himself in the middle of a large formation of Fokkers, who attacked him from all directions; and was again severely wounded in the left thigh, but succeeded in driving down two of the enemy in a spin.

     He lost consciousness after this, and his machine fell out of control. On recovery he found himself being again attacked heavily by a large formation, and singling out one machine, he deliberately charged and drove it down in flames.

     During this fight his left elbow was shattered and he again fainted, on on regaining consciousness he found himself still being attacked, but, notwithstanding that he was now severely wounded in both legs and his left arm shattered, he dived on the nearest machine and shot it down in flames.

     Being greatly exhausted, he dived out of the fight to regain our lines, but was met with another formation, which attacked and endeavoured to cut him off, but after a hard fight he succeeded in breaking up this formation and reached our lines, where he crashed on landing.

     This combat, in which Major Barker destroyed four enemy machines (three of them in flames), brought his total successes up to fifty enemy machines destroyed, and is a notable example of the exceptional bravery and disregard of danger which this very gallant officer has always displayed throughout his distinguished career.

     Major Barker was awarded the Military Cross on 10th January, 1917; first Bar on 18th July, 1917; the Distinguished Service Order on 18th February, 1918; second Bar to Military Cross on 16th September, 1918; and Bar to Distinguished Service Order on 2nd November, 1918.

The London Gazette, Second Supplement to The London Gazette of FRIDAY, the 29th of NOVEMBER 1918, Number 31042 at Pages 14203, 14204

The Victoria Cross was presented to Major Barker at Buckingham Palace, 1 March 1919. Still recovering from his wounds, Barker could only walk a few paces to receive the medal.

Captain William G. Barker’s Sopwith Snipe 7F.1, E8102. (Royal Air Force Museum)

William George Barker is Canada’s most highly-decorated military serviceman. He was born 3 November 1894 at Dauphin, in the Parkland Region of Manitoba, Canada. He was the first of nine children of George William John Barker, a farmer, and Jane Victoria Alguire Barker.

William G. Barker’s medals. Left to right: Victoria Cross; Distinguished Service Order and Bar; Military Cross and two Bars; 1914–1915 Star; British War Medal; Victory Medal with Mention in Despatches leaf spray; Medaglia d’argento al valor militare (Italy), Croix de guerre with star (France): and a second Silver Medal of Military Valor. (Canadian War Museum)

At the opening of World War I, Barker, having previously served with the 32nd Manitoba Horse, enlisted as a trooper with the 1st Canadian Mounted Rifles. He was trained as a machine gunner and sent to Europe with the Canadian Expeditionary Force. His unit fought in the 3rd Battle of Ypres. In early 1917, Barker volunteered as a gunner in the Royal Flying Corps, and after training, was commissioned a second lieutenant. He flew as an observer and gunner aboard a Royal Aircraft Factory B.E.2. Lieutenant Barker shot down at least two enemy aircraft, and was instrumental in calling artillery fire on massed enemy troops. He and his pilot were awarded the Military Cross.

From December 1916 to February 1917, Lieutenant Barker went through pilot training in England. It is reported that he soloed after less than one hour of instruction. After qualifying as a pilot, he returned to the Continent, serving with No. 15 Squadron. In May 1917, Barker was promoted to the rank of captain and placed in command of one of the squadron’s flights. During this period, Captain Barker was awarded a Bar to his Military Cross (a second award). Barker was wounded in August 1917 and was returned to England to recuperate, then spent some time as a flight instructor. He returned to France in October.

Captain Barker was transferred to 28 Squadron and assigned a Sopwith Camel F.1, B.6313. The squadron was sent to Italy, where Hawker engaged in attacking balloons and enemy facilities. He was promoted to major and awarded the Distinguished Service Order and a second bar to his Military Cross (a third award).

William George Barker, V.C., D.S.O. and Bar, M.C. and Two Bars, Royal Air Force, 1919. (Toronto Star)
Wing Commander William George Barker, V.C., D.S.O. and Bar, M.C. and Two Bars, Royal Air Force, 1919. (Toronto Star)

In the battle in which he earned the Victoria Cross, 27 October 1918, Barker was flying a Sopwith Snipe F7.1, E8102. He was very seriously wounded. In addition to the decorations of the United Kingdom, he was awarded the Croix de Guerre of France, and Italy’s Medaglia d’Argento al Valore Militare.

Barker flew more than 900 hours in combat during World War I. He is officially credited with destroying 50 enemy aircraft, including 9 balloons. All but the last four enemy airplanes were destroyed while flying B6313, his personal Sopwith Camel. (B6313 shot down more aircraft than any other fighter in history.)

Returning to Canada at the end of the War, he and fellow Canadian ace Billy Bishop formed Bishop-Barker Company, Ltd., and then Bishop-Barker Aeroplanes, a charter, aircraft sales and maintenance company.

William Barker married Miss Jean Bruce Kilbourn Smith, 1 June 1921, at Grace Church on-the-Hill, Toronto, Ontario, Canada. They had one daughter, Jean Antoinette Barker.

Billy Barker returned to military service with the newly-formed Canadian Air Force and was commissioned a wing commander. He was assigned to command Camp Borden Air Station. In 1924, Wing Commander Barker was assigned as Acting Director, the highest position in the C.A.F., until the creation of the Royal Canadian Air Force. Barker was then assigned as a liaison officer to the Royal Air Force. He attended the Royal Air Force Staff College from May 1925 to March 1926. Barker resigned from the R.C.A.F. in 1926, refusing to serve under an officer he did not respect.

Wing Commander William George Barker, V.C., D.S.O. and Bar, M.C. and Two Bars, Acting Director, Canadian Air Force, 1 April 1924–18 May 1924. (DND Archives RE64-236)

After leaving the military service, Barker worked at several positions, including the first president of the Toronto Maple Leafs hockey team. In 1930, he joined Fairchild Aircraft as a vice-president.

On 12 March 1930, while demonstrating a Fairchild KR-21, CF-AKR (s/n 1021) at Rockcliffe Air Station near Ottawa, Ontario, the airplane went out of control and crashed onto the ice-bound Ottawa River. William George Barker was killed. He was just 35 years old.

Wreck of Fairchild KR-21 CF-AKR (DND Archives RE74-165)

Following a state funeral, the body of Wing Commander William George Barker, V.C., D.S.O. and Bar, M.C. and Two Bars, Royal Canadian Air Force, was interred at Mount Pleasant Cemetery, Toronto, Ontario, Canada. More than 50,000 people lined the streets leading to the cemetery.

William George Barker Memorial at Mount Pleasant Cemetery, Toronto, Ontario, Canada. (Ontario War Memorials)
William George Barker Memorial at Mount Pleasant Cemetery, Toronto, Ontario, Canada. (Ontario War Memorials)

The Sopwith Snipe 7F.1 was a single-engine, two-bay biplane designed by Herbert Smith to replace the Sopwith Camel F.1. Fifteen Snipes were sent to France in August 1918 for evaluation. William Barker selected one of these, E8102, as his personal airplane. The Snipe was 19 feet, 10 inches (6.045 meters) long with a wingspan of 31 feet, 1 inch (9.474 meters) and overall height of 9 feet, 6 inches ( meters). It had an empty weight of 1,312 pounds (595 kilograms) and gross weight of 2,020 pounds (916 kilograms).

Sopwith Snipe 7F.1. B9966, the fifth prototype, was used for development testing at Martlesham Heath.. (BAE Systems)

The Snipe was powered by an air-cooled, normally-aspirated 24.938 liter (1,521.808 cubic-inch-displacement) Bentley BR.2 nine-cylinder rotary engine, manufactured by Humber, Ltd., Coventry, England. The engine had a compression ratio of 5.2:1 and was rated at 200 horsepower at 1,250 r.p.m.

Sopwith Snipe 7F.1, left front quarter. (Royal Air Force Museum)
Sopwith Snipe 7F.1, front view. (Wingnut Wings)
Sopwith Snipe 7F.1 E8006, left rear quarter. (Royal Air Force Museum)

The Snipe had a maximum speed of 121 miles per hour (195 kilometers per hour) at 10,000 feet (3,048 meters), and a service ceiling of 25,000 feet (7,620 meters).

The fighter was armed with two Vickers .303 Mk.I machine guns synchronized to fire forward through the propeller arc.

Sopwith Snipe 7F.1 E8044, right rear quarter.

© 2019, Bryan R. Swopes

26 October 1980

THE RESCUE OF THE CREW OF THE SCALLOPER TERRY T

By Sean M. Cross, CAPT, USCG (retired)

“As the basket was lowered a fifth time to pick up the two remaining men, a huge wave hit the awash stern of the TERRY T knocking the last two crewmen – the master and the engineer – into the water downwind of the helicopter and the ship. With the lives of the two crewmen suddenly threatened by the turbulent seas and the ship drifting down upon them…”

TODAY IN COAST GUARD AVIATION HISTORY — 26 OCTOBER 1980: HH-3F #1484 assigned to Air Station Cape Cod, MA and crewed by LTJG John P. Currier (AC); LTJG Robert L. Abair (CP); AM1 David L. Seavey and AE2 Gordon R. Warren (AV) was launched at 3:40 AM in response to the 110-foot fishing vessel Terry T out of New Bedford sinking with 10 crewman aboard. The eastern-rigged scallop trawler was 80 miles southeast of Nantucket in 30-foot seas, blowing snow and 60 knot winds gusting to 80 knots. The Terry T reported “4-feet of water in the engine room” (i) and requested dewatering pumps to help control the flooding. (ii)

That weekend, a coastal storm wreaked havoc when high winds and heavy seas lashed the Massachusetts coast line, damaging scores of small work and pleasure craft. (iii) The 31-year-old skipper, Roland Farland, said the Terry T was water tight when it was checked about 10 PM Saturday night as it rode out the severe coastal storm 70 miles east-south east of Nantucket. But when he checked the boat again shortly after midnight, water was flooding the engine room. (iv)

The TERRY T was built by Sturgeon Bay Shipbuilding as hull number 228 and official number 258929. The original name was “Wisconsin” – delivered in 1949 to the original owner John Roen. Records indicate that “John Roen would continue to be a forerunner in maritime accomplishments […] launching an Atlantic fishing fleet out of Boston, which was run from Sturgeon Bay.”
“We got three pumps going but we couldn’t contend with the water,” Farland said. (v)In the Interim, the Terry T had been in frequent radio contact with the Coast Guard through the Nantucket Lightship and by 3:30 AM had informed the Coast Guard they would have to evacuate. (vi) Currier, the most junior Aircraft Commander at the unit, noted he “got stuck” with duty that night because there was a wardroom party planned. It turned into a busy night, The #1484 aircrew had already flown on several SAR cases that evening including evacuating Coast Guard members from the Buzzards Bay Entrance Light due to structural concerns caused by the adverse weather. (vii) Currier described their return to base from the last case, “We went back into the air station and I remember shooting an instrument approach at 120 knots indicated airspeed and doing less than 20 knots over the ground.” He added, “We came in, landed and taxied into the lee of the hangar to shut the rotor head down and those guys were taking care of the post-flight and my wife was at the wardroom party. So when we got back into the wardroom at about 8 o’clock at night she said ‘You’re not going out again are you?’ and I said, ‘No way—nobody’s out there.’ ” (vii)
Sikorsky HH-3F Pelican 1484 (Sikorsky S-61R, s/n 61-661) hovers over Lands End with Golden Gate Bridge in background. 1989 photograph.  (U.S. Coast Guard 191114-G-G0000-006/SFO Museum 2012.114.002)

About 3:40 in the morning the aircrew was awakened by Rescue Coordination Center (RCC) Boston saying there was a scalloper taking on water and unable to control flooding about 80 miles southeast of Nantucket. The aircrew described it as an interesting launch because it was still blowing 60 knots (which exceeded the main rotor start limit)—so the duty crew dragged the helicopter about halfway out of the hangar to start the turbine engines and engage the rotor system. They did it in this manner because when a helicopter first starts, the rotors are flexible and droop under their own weight. Strong winds can cause the blades to flap up and down when they are at slow RPM causing them to contact the tail boom or fuselage and do serious damage.

#1484 took off and flew toward the last known position (LKP) about 15 miles east of the Nantucket Lightship under instrument flight rules (IFR)—flying in clouds with limited to zero visibility, navigating only by cockpit instruments. The aircraft experienced severe turbulence and Currier remarked, “The crew was holding on for dear life.” (ix)

Approximate route of flight to TERRY T’s last known position “about 70 miles southeast of Nantucket, about 15 miles east of the Nantucket Lightship.”

At 4:54 AM, #1484 was approaching the Terry T‘s LKP and Currier further described the situation as, “Pitch black except for the lightning and there was sleet—so we were concerned about icing.” Helicopter pilots avoid icing like dental work. When ice forms on rotor blades, they lose their ability to provide lift, and the aircraft can no longer maintain flight. The aircrew contacted Terry T on the radio and confirmed they still wanted dewatering pumps—they concurred and reported that the fishing boat had lost steering and “was at the mercy of thirty foot seas and fifty knot winds.” (x) However, the master came on the radio a few minutes later as #1484 was inbound and said, “We got a fire in the engine room, we can’t control it and I want everybody —there are 10 of us.”

As the water level rose it produced short circuits that caused spontaneous fires in the boat’s electrical system. Farland said the crew had used four fire extinguishers and had nothing left with which to fight the fires. Then radio contact was lost. (xi) From their transit altitude, the aircrew performed an instrument approach to the water astern of Terry T. (xii) The crew used a PATCH or Precision Approach to a Coupled Hover, an autopilot maneuver that transitions the helicopter from forward flight in the clouds down to an automatic hover at 50 feet visual with the water. (xiii) This maneuver can be disorienting in the clouds at night, particularly when low over the water with little room for error. Both pilots must continuously scan and interpret the flight instruments—this is critically important—to confirm the autopilot is flying the correct profile. This maneuver was described as “dicey” due to the HH-3F’s unreliable doppler. The aircrew finally made visual contact with the trawler’s glow as the aircraft descended below 150 feet.

Currier described the challenging situation, “When we arrived in a hover, we turned on the floodlights and neither myself, nor the co-pilot nor the flight mechanic thought we could do it. The tops were blowing off the waves and going over the boat and the boat was dead in the water so it was in the trough—so it was rolling more than rail-to-rail—it was getting green water over each rail as it rolled.” (xiv) With the helicopter pointing into the strong westerly winds—Terry T‘s “bow was pointed to the right (the aircraft’s 3 o’clock position), so I had no place to go to hoist,” added Currier. (xv) Seavey had similar sentiments, “This case was the only time that I had thoughts that I might not be able to complete the hoist [due to] the combination of high winds 50–60 knots or so and 25–30 foot seas.” (xvi) The aircrew was concerned with the extreme pitch and roll of the fishing vessel and height of the rigging and other obstacles, so they initially requested that the Terry T crew disembark the vessel to the life raft. However, when the fishermen inflated the raft, it immediately blew overboard. (xvii) After careful assessment, they decided that hoisting from about 40 feet above the highest waves to an area just aft of the pilot house was their best chance of success.

An MH-65D demonstrates a “trail line hoist” with a Coast Guard small boat. Note the hypotenuse or diagonal formed by the trail line running from the person on deck to the hoist hook. (U.S. Coast Guard)

With no suitable hover reference, Currier was guided only by the voice of his hoist operator, David Seavey. Initial attempts did not go well. The pilot is typically unable to see the hoist area (below and aft of the pilot seat) and must fly exclusively off the flight mechanic’s conning commands—this can be very challenging when the sole hover reference is a raging and turbulent sea surface of 30–35 foot swells. The crew was convinced that a “trail line hoist” was the right tool for the situation as it would allow the helicopter to hoist from a position offset 30–40 feet from the boat and facilitate Currier’s use of the bobbing fishing vessel as a hover reference.

A trail line is a 105-foot piece of polypropylene line (similar to a water ski rope) with a 300-pound weak link at one end and a weight bag at the other. The weight bag end of the trail is paid out below the helicopter and delivered to the persons in distress (usually vertically, but seasoned flight mechanics can literally “cast” the weight bag to a spot). The weak link is then attached to the hoist hook and the helicopter backs away until the pilot can see the hoisting area. The persons in distress can then pull the basket to their location—creating a hypotenuse or diagonal—as opposed to a purely vertical delivery.

Danforth anchor

This was great in theory, but not in practice as Seavey said, “The high winds caused the trail line delivery, even with the heavy weather weight bags (25 pounds) to sail aft and twice get fouled in the rigging. We backed off, discussed the situation and decided to try using the Danforth anchor—which worked.” (xviii) Being an amphibious helicopter, the HH-3F kit included a Danforth anchor (similar to any small recreational boating anchor) with a half-inch line—they used this as an improvised trail line and it worked perfectly—with one exception which would trigger problems later in the evolution. (xix)

Currier was now able to use the vessel’s radio antenna and momentary glimpses of the superstructure for visual reference. (xx) Seavey conducted four hoists with assistance from Warren, taking crewmen in the basket two-at-a-time on each hoist. (xxi) This was unusual but necessary due to fuel concerns, the need to hoist everyone before the trawler sank and the extreme difficulty involved in placing the basket on the vessel each time. Abair added, “While a series of ten one-man hoists could have been successful, it would have more than doubled the difficulty of the rescue and would have likely resulted in loss of life.” (xxii) Between hoists, Warren took the survivors aft in the cabin and provided them with blankets to get warm. Seavey gratefully described Warren’s efforts: “He assisted me during the hoists, was helping out without having to be told what I needed. He anticipated what I needed. He was the extra set of hands getting the rescue basket into the cabin and then clearly directed the survivors to the back of the cabin.” Often forgotten under these conditions was the superlative job done by Abair, a Direct Commission Aviator and veteran Marine Corps helicopter pilot, in his Safety Pilot role. He continuously scanned the system instruments to ensure the aircraft was operating normally and the flight instruments to ensure obstacle clearance and safe altitude—occasionally coming on the controls to assist. He conveyed critical information effectively in a dynamic environment without interfering with Seavey’s commands—the crew said he did a masterful job. (xxiii)

HH-3F #1484’s approximate hoisting position with TERRY T (represented with a generic fishing boat plan of roughly the same arrangement). As Dave Seavey stated, that diagram is accurate, “minus the massive seas, near hurricane force winds, pitch black and the boat being DIW.”

As the basket was lowered a fifth time to pick up the two remaining men, a huge wave hit the awash stern of the Terry T knocking the last two crewmen—the master and the engineer, brothers Roland and Brian Farland—into the water downwind of the helicopter and the ship. (xxiv) “I had one hand on the basket and one hand on my brother,” Farland said. (xxv) With the lives of the two crewmen suddenly threatened by the turbulent seas and the ship drifting down on them, Currier had to reposition the aircraft over the two men with only the conning commands from Seavey to guide him, With Seavey’s instructions, Currier demonstrated extreme skill and daring and maneuvered the basket into a position in the water so that the two men could literally fall into it, and they were lifted to safety—or so they thought.

At this point, the boat actually started to go down by the stern, Seavey had the basket and two men about two-thirds of the way from the boat deck to the helicopter when he realized that earlier in the evolution without aircrew knowledge, the fisherman had tied the trail line off to the pilot house rail. The helicopter was connected to the boat by the anchor line. Seavey shouted, “We’re tied to the boat, we have problems here.” (xxvi) Currier and Abair assessed the sea state then carefully descended from their hoisting altitude of 40 feet to 25 feet creating enough slack in the trail line and allowing Seavey and Warren to bring the basket into the door. At once, Seavey cut the anchor line with a knife and immediately conned, “Up, up, up” for the pilots to immediately pull power. At 25 feet, Seavey could see that the wave tops on either side were level with the helicopter. (xxvii)

After completing the hoists, it took about five minutes to secure the cabin—Seavey and Warren working together—Warren helped the Captain and crew to the rear of the cabin and secured the basket while Seavey was securing the hoist, closing the cabin door and reporting that the cabin was secured and ready for forward flight. As #1484 circled the scalloper, it had already began to founder—the decks awash with sea water. (xxviii) The flight mechanic and avionicsman administered first aid to the injured crew on the return flight that landed at 6:52 AM. Throughout the mission, Currier and his crew showed exemplary skill and courage. Currier stated, “We got them off and got back. The helicopter was pretty beat up—they actually had to change the tail rotor because of overstresses.” (xxix)

All 10 men (listed below) were saved from the Terry T—four of the survivors were from the same family. (xxx)

Roland Farland (Captain)
Elmer Beckman (Mate)
Brian Farland (Engineer)
John Santos (cook)
Donald Capps (deckhand)
George Altman (deckhand)
Ronald Charpentier (deckhand)
Stephen Farland (deckhand)
Peter Farland (deckhand)
George Johnston (deckhand) (xxxi)

“It was pretty hairy,” Roland Farland said. “I just have to commend the Coast Guard for doing such a terrific job. It was blowing good,” the New Bedford man said: “Seas were 30 feet and winds were blowing 60 to 65 miles.”

In a post-mission interview, Currier conveyed, “Visibility was about half a mile and it took us five hoists to get 10 people off the boat. We had to hover over it for about an hour. (xxxii) The problem with a situation like that is that you have no point of reference,” he said. “All you can see is the boat and the water, and they are both in motion. You try to keep the helicopter a stable platform, but it’s hard. I’ve been here three years and those were the worst condition I’ve seen.” (xxxiii)

Thirty-five years later, and older and wiser Vice Admiral (VADM) Currier reflected on that night. “This was not a solo pilot operation. This was a reflection of an incredibly talented flight mechanic and a solid co-pilot. Actually, I think that was my co-pilot’s first rescue mission after transitioning from the Marine Corps to the Coast Guard, and I think it was a heck of an eye-opener for him.” VADM Currier added, “In the Coast Guard we have some of the best rotary- and fixed-wing pilots there are. I can say that as the old Coast Guard aviator, but I’ve been around long enough in civil and military aviation to say our people are among the very best. They are challenged on a daily basis with missions that would be a big deal in other services. For us, they’re how we do business—night, offshore, poor visibility, terrible weather. It’s always single-ship, and it’s always single crew. It requires skill, proficiency and individual initiative.” (xxxiv)

For this nearly impossible rescue, Currier earned the Harmon International Aviation Trophy—the only Coast Guard Aviator to warn this distinction. The Harmon Trophy—the aviator’s award—is given for the most outstanding international achievements in the preceding year, with the art of flying receiving first consideration. He joined other winners such as: Colonel Charles A. Lindbergh: General Jimmy Doolittle, Major Charles E. Yeager, Howard Hughes, Major Edwin E. “Buzz” Aldrin and Amelia Earhart.

The Harmon International Trophy at the Smithsonian Institution National Air and Space Museum. The Harmon Trophy (1926) was established by Clifford Harmon, a wealthy balloonist and aviator.  (NASM)

The Harmon Trophy was presented to him at the Old Executive Building across from The White House by Vice President Dan Quayle on 21 June 1991 (11 years after the mission). His name is inscribed on the six foot tall trophy in a glass enclosure in the National Air and Space Museum. Interestingly, Currier was never notified regarding his selection of the award, which has historically been presented by the president. The Reagan assassination attempt by John Hinckley, Jr., on 30 March 1981 wreaked havoc with the President’s schedule and the award presentation was overlooked. His parents while visiting the Smithsonian Institution National Air and Space Museum in Washington, D.C., six years later, reportedly saw his name engraved on the trophy and asked him about it. It took another four years of action by headquarters and the Coast Guard Aviation Association before Currier received the award.

Vice President of the United States James Danforth Quayle congratulates Lieutenant Commander John Philip Currier, U.S. Coast Guard, on the presentation of the Harmon International Aviator Trophy, 21 June 1991.

The #1484 aircrew also earned the American Helicopter Society (now, the Vertical Flight Society) Frederick L. Feinberg Award in March 1981—presented to the pilot or crew of a vertical flight aircraft who demonstrated outstanding skills or achievement during the preceding 18 months. (xxxv)

The Frederick L. Feinberg Award (1961) was established by the American Helicopter Society, in memory of an outstanding helicopter test pilot and an exemplary person.

Lieutenant (junior grade) Currier and AM1 Seavey both earned the Distinguished Flying Cross for this mission, while LTJG Abair and AE2 Warren earned the Coast Guard Commendation Medal with Operational Distinguishing Device in a ceremony at Air Station Cape Cod in June 1981. (xxxvi) The Currier and Abair Citations are below. The Seavey and Warren citations have not been located.

Vice Admiral John Philip Currier, Vice Commandant of the United States Coast Guard. Photographed 2009. (U.S. Coast Guard)

Vice Admiral John Philip Currier, United States Coast Guard (Retired), passed away on 01 March 2020 from natural causes at his home in Traverse City, Michigan. His ashes were interred with full military honors at Arlington National Cemetery on 14 September 2021. He is recognized as the “godfather of the Coast Guard’s modern H-60 helicopter program” and received commendations for flying and rescue work over his 38-year career in the Coast Guard. He held assignments as an aviator at Air Stations Cape Cod (MA), Sitka (AK), Traverse City (MI), Astoria (OR), Detroit (MI) and Miami (FL). He held many senior leadership positions including Chief of Operations and Chief of Staff for the Pacific Area; Commander of the Thirteenth District in the Pacific Northwest; Coast Guard Chief of Staff; and finally, Vice Commandant, the Service’s second in command.  From 2008–2012, just prior to his tenure as Vice Commandant, the Coast Guard Aviation community experienced a horrendous series of aircraft accidents that took the lives of 18 Coast Guard aircrewmen. The dilemma weighed heavily on Admiral Currier, but—he was the RIGHT man, in the RIGHT place, at the RIGHT time when the Service needed him most. The Service was searching for solutions—long fatigued and exasperated from attending memorial services, hearing eulogies and listening to “Amazing Grace”—he led us out of that morass to “clearer skies” with a new focus on cockpit leadership, proficiency, risk management and a “back to basics” approach when it came to tactics, techniques and procedures. He guided a structured fleet-wide operational risk assessment and directed corrective actions which yielded a remarkable improvement in aviation professionalism and safety. These efforts added to his already robust Coast Guard Aviation legacy.

***********************

Retired Captain Sean M. Cross served 25 years in the Coast Guard as a helicopter pilot and aeronautical engineer. Flying both the MH-60T and MH-65D, he accumulated over 4,000 flight hours while assigned to Air Stations Clear Water, FL; Cape Cod, MA; San Diego, CA; Elizabeth City, NC and Traverse City, MI, which he commanded.

“There is only one Coast Guard Aviator’s name etched on the Harmon Trophy and the story of HOW it got there should be preserved for posterity.”

i Boston AP article – multiple sources – “The ‘Terry T.” of New Bedford called for help at about 3:30 a m. when its engine room filled with about four feet of water, spokesman Mario Toscano of the Coast Guard’s Boston Rescue Center said.” – available here: https://www.newspapers.com/newspage/439301890/
ii John Currier (HH-3F Aircraft Commander) in video discussion (Exit Interview) with Scott T. Price (Coast Guard Historian) in Washington, D.C. on April 23, 2014.
iii Jack Stewardson, “10 fishermen saved; 2nd trawler overdue,” The Standard-Times, New Bedford, Mass., October 27, 1980, page 1.
iv Jack Stewardson, “It was pretty hairy, but help came for fishing crew,” The Standard-Times, New Bedford, Mass.,, October 28, 1980, page 4.
v Ibid.
vi Ibid.
vii Gordon Warren (HH-3F Avionicsman) in phone interview with the author on September 30, 2021.
viii Currier interview
ix Ibid.
x Barrett Thomas Beard, “Wonderful Flying Machines: A History of U.S. Coast Guard Helicopters,” (Annapolis: Naval Institute Press, 1996), page 146.
xi Ibid
xii Currier interview
xiii Robert Abair (HH-3F Co-Pilot) in email message to author on September 30, 2021. “The term PATCH implies a coupled hover, which was not the case. All hovering was done manually. Because of the heavy seas, it was impossible to couple the aircraft to the radar altimeter. The entire mission from lift off to touch down was hand flown due to turbulence.”
xiv Ibid.
xv Ibid.
xvi David Seavey (HH-3F Flight Mechanic) in email message to author on September 22, 2021.
xvii Currier interview
xviii Seavey email.
xix Currier interview
xx Beard, “Wonderful Flying Machines: A History of U.S. Coast Guard Helicopters,” page 147.
xxi Seavey email.
xxii Abair email.
xxiii Seavey email.
xxiv Staff Writer (1), “Manchester Man Cited by U.S. Coast Guard,” Manchester Evening Herold, June 22, 1981, page 20 – available here: http://www.manchesterhistory.org/News/Manchester%20Evening%20Hearld_1981-06-22.pdf
xxv Stewardson, “It was pretty hairy, but help came for fishing crew,” page 4.
xxvi Currier interview xxvii Ibid
xxviii Seavey email.
xxix Currier interview
xxx Beard, “Wonderful Flying Machines: A History of U.S. Coast Guard Helicopters,” page 147.
xxxi Stewardson, “10 fishermen saved; 2nd trawler overdue,” page 4.
xxxii Staff Writer (2), “CG pulls 10 from blazing trawler,” Cape Cod Times, October 27, 1980, page unknown
(Falmouth Public Library Microfiche retrieved on September 29, 2021 by Sue Henken). xxxiii Ibid
xxxiv American Helicopter Society International – Vertipedia. “Biography, John P. Currier, United States,” Last modified April 14, 2021. https://vertipedia-legacy.vtol.org/milestoneBiographies.cfm?bioID=428
xxxv Vertical Flight Society. “Frederick L. Feinberg Award previous recipients,” Last modified in 2021. https://vtol.org/awards-and-contests/vertical-flight-society-award-winners?awardID=3
xxxvi Staff Writer (1), “Manchester Man Cited by U.S. Coast Guard,” page 20.

© 2021, Sean M. Cross

26 October 1962

The very last Convair B-58 Hustler, with company personnel, 26 October 1962. (University of North Texas Libraries)

26 October 1962: The United States Air Force received the 116th and last Convair B-58 Hustler, B-58A-20-CF 61-2080. It was assigned to the 305th Bombardment Wing at Bunker Hill Air Force Base, Indiana. After just over seven years in service, this airplane was retired to The Boneyard at Davis-Monthan Air Force Base, Tucson, Arizona, 6 January 1970. It is on display at the Pima Air & Space Museum, nearby.

The B-58 Hustler was a high-altitude Mach 2 strategic bomber which served with the United States Air Force from 1960 to 1970. It was crewed by a pilot, navigator/bombardier and a defensive systems operator, located in individual cockpits. The aircraft is a delta-winged configuration similar to the Convair F-102A Delta Dagger and F-106 Delta Dart supersonic interceptors.

The Hustler is 96 feet, 10 inches (29.515 meters) long, with a wing span of 56 feet, 10 inches (17.323 meters) and an overall height of 31 feet 5 inches (9.576 meters). The fuselage incorporates the “area rule” which resulted in a “wasp waist” or “Coke bottle” shape for a significant reduction in aerodynamic drag. The airplane’s only control surfaces are two “elevons” and a rudder, and there are no flaps.

The B-58’s delta wing has a total area of 1,542.5 square feet (143.3 square meters) and the leading edges are swept back at a 60° angle. The wing has an angle of incidence of 3° and 2° 14′ dihedral (outboard of Sta. 56.5).

The B-58A had an empty weight of 51,061 pounds (23161 kilograms), or 53,581 pounds (24,304 kilograms) with the MB-1 pod. The maximum takeoff weight was 158,000 pounds (71,668 kilograms).

The B-58A was powered by four General Electric J79-GE-5 axial-flow afterburning turbojet engines, suspended under the wings from pylons. This was a single-shaft engine with a 17-stage compressor and 3-stage turbine. It had a Normal Power rating of 9,700 pounds of thrust (43.148 kilonewtons). The Military Power rating was 10,000 pounds (44.482 kilonewtons), and it produced a maximum 15,600 pounds (69.392 kilonewtons) at 7,460 r.p.m., with afterburner. The J79-GE-5 was 16 feet, 10.0 inches (5.131 meters) long and 2 feet, 11.2 inches (0.894 meters) in diameter. It weighed 3,570 pounds (1,619 kilograms).

The bomber had a cruise speed of 544 knots (626 miles per hour/1,007 kilometers per hour) and a maximum speed of 1,147 knots (1,320 miles per hour/2,124 kilometers per hour) at 67,000 feet (20,422 meters). The B-58A had a combat radius of 4,225 nautical miles (4,862 statute miles/7,825 kilometers). Its maximum ferry range was 8,416 nautical miles (9,685 statute miles/15,586 kilometers).

FAI altitiude record setting Convair B-58A-10-CF 59-2456, showing the bomber's weapons capability. (U.S. Air Force)
Convair B-58A-10-CF 59-2456 with display of potential weapons. (U.S. Air Force)

The B-58 weapons load was a combination of Mark 39, B43 or B61 thermonuclear bombs. The weapons could be carried in a jettisonable centerline pod, which also carried fuel. The four of the smaller bombs could be carried on underwing hardpoints. There was a General Electric M61 20 mm rotary cannon mounted in the tail, with 1,200 rounds of ammunition, and controlled by the Defensive Systems Officer.

The B-58 weapons load was a combination of W-39,  B43 or B61 nuclear bombs. The W-39 warhead was carried in the jettisonable centerline pod, which also carried fuel. The smaller bombs could be carried on underwing hardpoints. There was a defensive 20 mm M61 rotary cannon mounted in the tail, with 1,040 rounds of ammunition and controlled by the Defensive Systems Officer.

Convair B-58A- -CO 61-2080 at the Pima Air Museum, Tucson, Arizona. (Wikipedia)
Convair B-58A-20-CF 61-2080 at the Pima Air & Space Museum, Tucson, Arizona. (Wikipedia)

© 2018, Bryan R. Swopes

26 October 1962

The last of 744 Boeing B-52 Stratofortress bombers, B-52H-175-BW, 61-0040, is rolled out at the Boeing plant at Wichita, Kansas. (Boeing)
The last of 744 Boeing B-52 Stratofortress bombers, B-52H-175-BW, 61-0040, is rolled out at the Boeing plant at Wichita, Kansas. (Boeing)

26 October 1962: The very last Boeing B-52 Stratofortress was delivered to the United States Air Force. B-52H-175-BW 61-0040, which was rolled out at Wichita, Kansas, 22 June 1962, was the 744th B-52 built by Boeing at its Seattle and Wichita plants.

The B-52 Stratofortress is a long range strategic bomber powered by eight jet engines. The first flight took place 15 April 1952 at Boeing Field, Seattle, Washington, when test pilots Alvin M. (“Tex”) Johnston and Lieutenant Colonel Guy M. Townsend, U.S. Air Force, took off in the second prototype, the YB-52, serial number 49-231. The first production aircraft, B-52A-1-BO, 52-001, was rolled out at Boeing’s Plant 2 on 18 March 1954. The first operational Stratofortress, an RB-52B-15-BO, 52-8711, was delivered to the Strategic Air Command’s 93d Bombardment Wing (Heavy) at Castle Air Force Base, California, 29 June 1955. (52-8711 was retired 29 September 1965 and is on display at the Strategic Air and Space Museum, Offutt AFB, Nebraska.)

Boeing’s Seattle Plant 2 produced B-52 A, B, C model Stratofortresses, with D, E, and F versions built both there and at Wichita, Kansas. With the introduction of the B-52G, all bomber production was shifted to Wichita in 1957. The Wichita plant produced the B-52D through B-52H bombers from 1955 until production ended in 1962.

Boeing B-52H-175-BW Stratofortress 61-0040 in SIOP camouflage, assigned to 2nd Air Force, circa 1975. (U.S. Air Force)

The Stratofortress was designed as a strategic bomber armed with nuclear bombs. It was originally powered by turbojet engines, but more powerful and efficient turbofan engines were introduced with the final version, the B-52H.

B-52D and B-52F Stratofortresses were first used in combat during the Vietnam War when they carried as many as 108 500-pound bombs to attack industrial targets in North Vietnam and enemy troop concentrations. Thirty B-52s were lost due to enemy action during the war. Most of these bombers were lost to radar-guided surface to air missiles. Three B-52D crews are credited with air-to-air victories, when they each shot down a Mikoyan-Gurevich MiG 21 interceptor with their four tail-mounted .50-caliber Browning machine guns. (The B-52H was equipped with a 20mm M61 Vulcan rotary cannon, though this has been removed.)

The Stratofortress was used during Operation Desert Storm in 1991, Operation Allied Force in 1999, and Operation Enduring Freedom from 2001 to the present.

Boeing B-52H Stratofortress. (U.S. Air Force)

The B-52H is the only version still in service. The U.S. Air Force contracted 62 B-52H Stratofortresses, serial numbers 60-0001 through 60-0062, on 6 May 1960. A second group of 40, serials 61-0001 through 61-0040, were ordered later. All were built at the Boeing Wichita plant. As of 19 May 2016, 75 of the original 102 bombers, including 61-0040, are still in the U.S. Air Force inventory. Beginning in 2013, the Air Force began a fleet-wide technological upgrade for the B-52H, including a digital avionics and communications system, as well as an internal weapons bay upgrade.

The B-52H was developed to carry four Douglas GAM-87 Skybolt air-launched ballistic missiles on pylons mounted under the wings, inboard of the engines. The Skybolt was armed with a 1-megaton W-59 thermonuclear warhead. The program was cancelled, however, and the North American Aviation AGM-28 Hound Dog air-launched cruise missile was used instead. (Interestingly, the Hound Dog’s Pratt & Whitney J52-P-3 turbojet engine could be used to supplement the B-52’s takeoff thrust, and then refueled from the bomber’s tanks before being air-launched.)

A Boeing B-52H Stratofortress during a deterrent patrol near the Democratic People’s Republic of North Korea, 2016. The bomber is carrying a load of Mk.84 2,000-pound JDAM “smart” bombs. (Master Sgt. Lance Cheung, U.S. Air Force)

The B-52H is a sub-sonic, swept wing, long-range strategic bomber. It was originally operated by a crew of six: two pilots, a navigator and a radar navigator, an electronic warfare officer, and a gunner. (The gunner was eliminated after 1991). The airplane is 159 feet, 4 inches (48.565 meters) long, with a wing span of 185 feet (56.388 meters). It is 40 feet, 8 inches (12.395 meters) high to the top of the vertical fin. The B-52H uses the vertical fin developed for the B-52G, which is 22 feet, 11 inches (6.985 meters) tall. This is 7 feet, 8 inches (2.337 meters) shorter than the fin on the XB-52–B-52F aircraft, but the fin’s chord is longer.

The bomber has an empty weight of 172,740 pounds (78,354 kilograms) and its Maximum Takeoff Weight (MTOW) is 488,000 pounds (221,353 kilograms).

The wings of the B-52H have a total area of 4,000 square feet ( square meters). The leading edges are swept aft to 36° 58′. The angle of incidence is 6°, and there is 2° 30′ dihedral. (The wings are very flexible and exhibit pronounced anhedral when on the ground.) To limit twisting in flight, the B-52 has spoilers on top of the wings rather than ailerons at the trailing edges.

The most significant difference between the B-52H and the earlier Stratofortresses is the replacement of the eight Pratt & Whitney J57-series turbojet engines with eight Pratt & Whitney Turbo Wasp JT3D-2 (TF33-P-3) turbofans, which are significantly more efficient. They are quieter and don’t emit the dark smoke trails of the turbojets. The TF-33 is a two-spool axial-flow turbofan engine with 2 fan stages, a 14-stage compressor section (7-stage intermediate pressure, 7-stage high-pressure) and and a 4-stage turbine (1-stage high-pressure, 3-stage low-pressure). The TF33-P-3 has a maximum continuous power rating of 14,500 pounds of thrust (64.499 kilonewtons) at 9,750 r.p.m., N1. Military Power, limited to 30 minutes, is 16,500 pounds (73.396 kilonewtons) at 10,000 r.p.m., N1. Each engine produces a maximum of 17,000 pounds of thrust (75.620 kilonewtons) at 10,050 r.p.m., N1, with a 5-minute limit. The TF33-P-3 is 11 feet, 4.32 inches (3.4625 meters) long, 4 feet, 4.93 inches (1.3442 meters) in diameter and weighs 3,900 pounds (1,769 kilograms).

The B-52H has a cruise speed of 456 knots (525 miles per hour/845 kilometers per hour). It has a maximum speed, with Military Power, of 555 knots (639 miles per hour/1,028 kilometers per hour) at 20,700 feet (6,309 meters)—0.906 Mach. The service ceiling is 46,900 feet (14,295 meters). The unrefueled range is 8,000 miles (12,875 kilometers). With inflight refueling, its range is limited only by the endurance of its crew.

BARKSDALE AIR FORCE BASE, La. (AFPN) -- Munitions on display show the full capabilities of the B-52 Stratofortress. (U.S. Air Force photo by Tech. Sgt. Robert J. Horstman)
A Boeing B-52H Stratofortress with a display of potential weapons. (Technical Sergeant Robert J. Horstman, U.S. Air Force)

The B-52H can carry a wide variety of conventional free-fall or guided bombs, land-attack or anti-ship cruise missiles, and thermonuclear bombs or cruise missiles. These can be carried both in the internal bomb bay or on underwing pylons. The maximum bomb load is approximately 70,000 pounds (31,751 kilograms).

The B-52H was equipped with a General Electric M61 Vulcan 20 mm six-barreled rotary cannon (a “Gatling gun”) in a remotely-operated tail turret. The gun had a rate of fire of 4,000 rounds per minute, and had a magazine capacity of 1,242 rounds. After 1991, the gun and its radar system were removed from the bomber fleet. The flight crew was reduced to five.

The very last B-52 Stratofortress built, B-52H-175-BW 61-0040, on takeoff at Minot Air Force Base. (U.S. Air Force)

Beginning in 2009, eighteen B-52H bombers were placed in climate-controlled long term storage at Tinker Air Force Base, Oklahoma.  In 2014, the entire fleet began a major avionics upgrade. As of December 2015, fifty-eight of the bombers remained in the active fleet of the United States Air Force and eighteen are assigned to the Air Force Reserve.

Recently, a B-52H-156-BW Stratofortress, 61-0007, Ghost Rider, was returned to operational status after eight years in storage at Davis-Monthan Air Force Base, Tucson, Arizona. 45,000 man-hours were required to restore the bomber.

The B-52H is expected to remain in service until 2040.

61 years after roll-out, 61-0040 is still in service with the United States Air Force, assigned to the 23rd Bomb Squadron, 5th Bomb Wing at Minot Air Force Base, North Dakota.

Boeing B-52H-175-BW Stratofortress 61-0040 parked at Anderson Air Force Base, Guam. (U.S. Air Force)

© 2019, Bryan R. Swopes

26 October 1958

Pan American World Airways’ Boeing 707-121, N711PA, Clipper America, at Idlewild Airport, New York, 26 October 1958. (Pan American World Airways)

26 October 1958: Pan American World Airways opened the “Jet Age” with the first commercial flight of an American jet airliner. Pan Am’s Boeing 707-121 Clipper America, N711PA, departed New York Idlewild (IDL) on an 8 hour, 41 minute flight to Paris Le Bourget (LBG), with a fuel stop at Gander, Newfoundland (YQX). (The actual flight time was 7 hours.) The distance was 3,634 miles (5,848 kilometers). Aboard were 111 passengers and 11 crewmembers.

A Pan Am company publication explained the need for the stop at Gander:

The Jet could not be fully loaded with fuel before takeoff because of weight restrictions imposed at Idlewild. Fuel capacity of the jet is 17,398 gallons, allowing a cruising range of 4,400 miles. But with a full pay load of passengers, only 9,731 gallons could be taken aboard in New York.

Pan American Clipper, Vol. XV, No. 11, November 1958, Page 6, Column 5

The Boeing 707 was developed from the earlier Model 367–80, the “Dash Eighty”. It is a four-engine jet transport with swept wings and tail surfaces. The leading edge of the wings are swept at a 35° angle. The airliner had a flight crew of four: pilot, co-pilot, navigator and flight engineer. The 707-121 is 145 feet, 1 inch (44.221 meters) long with a wing span of 130 feet, 10 inches (39.878 meters). The top of the vertical fin stands 42 feet, 5 inches (12.929 meters) high. The 707 pre-dated the ”wide-body” airliners, having a fuselage width of 12 feet, 4 inches (3.759 meters).

The first versions were powered by four Pratt & Whitney Turbo Wasp JT3C-6 turbojet engines, producing 11,200 pounds of thrust (49,820 kilonewtons), and 13,500 pounds (60.051 kilonewtons) with water injection. This engine was a civil variant of the military J57 series. It was a two-spool axial-flow turbojet engine with a 16-stage compressor and 2 stage turbine. The JT3C-6 was 11 feet, 6.6 inches (3.520 meters) long, 3 feet, 2.9 inches (0.988 meters) in diameter, and weighed 4,235 pounds (1,921 kilograms).

The airliner’s empty weight is 122,533 pounds (55,580 kilograms). Maximum take off weight (MTOW) is 257,000 pounds (116,573 kilograms). At MTOW, the 707 required 11,000 feet (3,352.8 meters) of runway to take off. Its maximum speed is 540 knots (1,000 kilometers per hour). It had a range of 2,800 nautical miles (5,185.6 kilometers).

The Boeing 707 was in production from 1958 to 1979. 1,010 were built. As of 2011, 43 707s were still in service.

Boeing delivered N711PA to Pan American on 17 October 1958. The airliner was named Clipper America,  but was later renamed Clipper Mayflower. It was leased to Avianca (Aerovías Nacionales de Colombia S.A.) from 1960 to 1962. In April 1965 the 707 was upgraded to the –121B standard. This included a change from the turbojet engines to quieter, more powerful and efficient Pratt and Whitney JT3D-1 turbofans, producing 17,000 pounds of thrust. The wings were modified to incorporate changes introduced with the Boeing 720, and a longer tailplane installed. Pan Ayer of Panama purchased Clipper Mayflower 21 February 1975. It was later leased to Türk Hava Yolları, the Turkish national airline, and went on to serve with Air Asia Company Limited (an Air America aircraft service unit) and E-Systems. After 26 years of service, in August 1984 Clipper America was scrapped at Taipei.

Pan American World Airways’ Boeing 707-121, N711PA, Clipper America, arriving at Aéroport de Paris – Le Bourget, Paris, France, 27 October 1958. (Photograph © Jon Proctor. Used with permission.)

© 2018, Bryan R. Swopes