Tag Archives: Strategic Air Command

29 September 1965

The Strategic Air Command’s very first operational Boeing B-52, Boeing RB-52B-15-BO Stratofortress 52-8711. (Angelfire)

29 September 1965: Ten years after it entered service, the first operational Boeing B-52 Stratofortress, RB-52B-15-BO 52-8711, was retired to the Strategic Aerospace Museum, Offutt Air Force Base, Nebraska.

The first operational B-52 Stratofortress, RB-52B-15-BO 52-8711. (U.S. Air Force)
The first operational B-52 Stratofortress, RB-52B-15-BO 52-8711. (U.S. Air Force)

52-8711 had arrived at Castle Air Force Base, California, 29 June 1955, and was assigned to the 93rd Bombardment Wing (Heavy). It later served with the 22nd Bombardment Wing (Heavy) at March Air Force Base, California.

Boeing RB-52B-15-BO Stratofortress 52-8711, 22 Bombardment Wing (Heavy), March AFB, 1965. Compare this photograph to the image above. (U.S. Air Force)
Boeing RB-52B Stratofortress on display at Offutt Air Force Base, Nebraska. (Wikimedia)

© 2019, Bryan R. Swopes

5 August 1954

The first production B-52A takes off from Boeing Field, 5 August 1954. (Boeing)

5 August 1954: The first production Boeing B-52A Stratofortress, B-52A-1-BO 52-001, made its first flight from Boeing Field, Seattle, Washington.

Boeing B-52A Stratofortress 52-001 rollout, 18 March 1954. (Boeing)

The B-52A differed from the XB-52 and YB-52 in that its cockpit was arranged for side-by-side seating, rather than the B-47-type tandem arrangement of the prototypes. It also had an inflight refueling system allowing it to receive fuel from an airborne KC-97 tanker.

Boeing B-52A Stratofortress 52-001 takes off from Boeing Field, 4 August 1954. (U.S. Air Force 021001-O-9999G-015)

52-001 was used as a service test aircraft along with sister ships 52-002 and 52-003. It was used to test the shorter vertical fin of the B-52G.  It was permanently grounded at Chanute Air Force Base in the early 1960s.

Boeing B-52A-1-BO Stratofortress 52-001 during its first flight, 5 August 1954. (U.S. Air Force)

© 2020, Bryan R. Swopes

7 July 1985

The first operational B-1B Lancer, 83-0065, Star of Abilene, flying over Dyess AFB, 7 July 1985. (Reporter-News)

7 July 1985: The Strategic Air Command received the first operational Rockwell B-1B Lancer, serial number 83-0065, Star of Abilene, at Dyess Air Force Base, Abilene, Texas. It flew for 17 years, 7 months, 23 days before being retired 1 March 2003 and preserved at Dyess.

The Rockwell B-1B is a long-range, supersonic bomber with variable-sweep wings. It is operated by two pilots and two combat systems officers. The Rockwell B-1B is 146 feet (44.501 meters) long, with the wing span varying from 79 feet (24.079 meters) to 137 feet (41.758 meters). It is 34 feet (10.363 meters) high at the top of the vertical fin. The bomber’s empty weight is 192,000 pounds (87,090 kilograms) and the Maximum Takeoff Weight (MTOW) is 477,000 pounds (216,364 kilograms).

The B-1B is powered by four General Electric F101-GE-102 afterburning turbofan engines. This is an axial-flow engine with a 2-stage fan section, 9-stage compressor and 3-stage turbine (1 high- and 2 low-pressure stages). It is rated at 17,390 pounds of thrust (77.35 kilonewtons), and 30,780 pounds of thrust (136.92 kilonewtons) with afterburner. The F101-GE-102 is 15 feet, 0.7 inches (4.590 meters) long, 4 feet, 7.2 inches (1.402 meters) in diameter, and weighs 4,460 pounds (2,023 kilograms).

A Rockwell B-1B drops Mk. 82 bombs from its three weapons bays. (U.S. Air Force)

The B-1B has a maximum speed of Mach 1.25 (830 miles per hour (1,336 kilometers per hour) at high altitude, or 0.92 Mach (700 miles per hour, 1,127 kilometers per hour) at 200 feet (61 meters). The Lancer has a service ceiling of 60,000 feet (18,288 meters), and an unrefueled range of 7,456 miles (11,999 kilometers).

It can carry up to 84 Mk.82 500-pound bombs, 24 Mk.84 2,000-pound bombs, or other weapons.

100 B-1B Lancers were built by Rockwell International’s aircraft division at Air Force Plant 42, Palmdale, California, between 1983 and 1988. As of February 2018, 62 B-1B bombers are in the active Air Force inventory.

Rockwell B-1B with wings swept. (U.S. Air Force)
Rockwell B-1B with wings swept. (U.S. Air Force)

© 2018, Bryan R. Swopes

29 June 1955

The first operational Boeing B-52 Stratofortress, RB-52B-15-BO 52-8711. (U.S. Air Force)
The first operational Boeing B-52 Stratofortress, RB-52B-15-BO 52-8711. (U.S. Air Force)

29 June 1955: The first operational Boeing B-52 Stratofortress, RB-52B-15-BO 52-8711, was delivered to the 93rd Bombardment Wing, Heavy, at Castle Air Force Base, Merced, California. The bomber was accepted from Boeing at Larson Air Force Base, Moses Lake, Washington, by the 93rd’s commanding officer, Brigadier General William Emanuel Eubank, Jr., U.S. Air Force, before flying to Castle. The new long-range heavy bombers would replace the 93rd’s Boeing B-47 Stratojets.

Fifty B-52Bs were built by Boeing at its Plant 2, Seattle, Washington. Twenty-seven of these were RB-52B reconnaissance bombers. They were designed to accept a pressurized electronic intelligence and photographic reconnaissance capsule with a two-man crew that completely filled the bomb bay. Without the capsule aboard, the RB-52s were capable of the same bombing missions as their sister B-52Bs. The change could be made within a few hours.

Pressurized two-man RB-52 reconnaissance pod.
Pressurized two-man RB-52 reconnaissance pod. (U.S. Air Force)

The B-52B/RB-52B was operated by a six-man flight crew for the bombing mission, and eight for reconnaissance. These were the aircraft commander/pilot, co-pilot, navigator, radar navigator/bombardier, electronic warfare officer, and gunner, plus two reconnaissance technicians when required.

The airplane was 156.6 feet, (47.7 meters) long with a wingspan of 185.0 feet (56.4 meters) and overall height of 48.3 feet (14.7 meters). The wings were mounted high on the fuselage (“shoulder-mounted”) to provide clearance for the engines which were suspended on pylons. The wings’ leading edges were swept aft to 36° 54′. Their angle of incidence was 6° and there was 2° 30′ dihedral. The wing area was 4,000 square feet (372 square meters). The B-52B’s calculated empty weight was 164,081 pounds (74,426 kilograms), with a combat weight of 272,000 pounds (123,377 kilograms) and a maximum takeoff weight of 420,000 pounds (190,509 kilograms).

The bomb bay of this RB-52B-10-BO Stratofortress, 52-012, is open, revealing the reconnaissance pod. (U.S. Air Force)

Early production B-52Bs were powered by eight Pratt & Whitney J57-P-1W turbojet engines, while later aircraft were equipped with J57-P-19W and J57-P-29W or WA turbojets. The engines were grouped in two-engine pods on four under-wing pylons. The J57 was a two-spool, axial-flow engine with a 16-stage compressor section (9 low- and 7-high-pressure stages) and a 3-stage turbine section (1 high- and 2 low-pressure stages). The J57-PW-1 engines had a Normal Power rating of 8,250 pounds of thrust (32.698 kilonewtons) at 9,720 r.p.m., N1, continuous; Military Power, 9,500 pounds thrust (42.258 kilonewtons) at 9,950 r.p.m., N1, for 30 minutes; and Maximum Power, 11,100 pounds of thrust (49.375 kilonewtons) with water injection, at 9,950 r.p.m., N1, 5 minute limit. The J57-PW-1 was 3 feet. 4.5 inches (1.029 meters) in diameter, 13 feet, 1.2 inches (3.993 meters) long, and weighed 4,210 pounds (1,910 kilograms).

Boeing RB-52B-10-BO Stratofortress 52-013. (U.S. Air Force)

The B-52B/RB-52B had a cruise speed of 453 knots (521 statute miles per hour/839 kilometers per hour) at 34,950 feet (10,653 meters). The maximum speed was 551 knots (634 miles per hour/1,020 kilometers per hour) at 20,300 feet (6,187 meters). The service ceiling at combat weight was 47,700 feet (14,539 meters). The maximum service ceiling was 55,700 feet (16,977 meters).

The B/RB-52B had a maximum fuel capacity of 37,550 gallons (142,142 liters) of JP-4. It also carried 360 gallons (1,363 liters) of water for injection during takeoff. The bomber’s maximum ferry range was 6,380 nautical miles (7,342 statute miles/11,816 kilometers). With a 10,000 pound (4,536 kilogram) bomb load, the B/RB-52B had a combat radius of 3,070 nautical miles (3,533 miles/5,686 kilometers). With inflight refueling, the bomber’s range was world-wide.

Tail gun turret of an early B-52 Stratofortress
B-52 tail gun turret

Defensive armament consisted of four Browning Aircraft Machine Guns, Caliber .50, AN-M3, mounted in a tail turret with 600 rounds of ammunition per gun. These guns had a combined rate of fire of 4,800 rounds per minute.

The B-52B could carry twenty-seven 1,000 pound (454 kilogram) bombs, or two Mk.21 17,000 pound (7,711 kilogram) Special Weapons (thermonuclear bombs). The maximum bomb load was 43,000 pounds (19,505 kilograms). (At the time 52-8711 entered service, only fission weapons were available. The most powerful of these was the variable yield Mk.6, which could produce a maximum 160 kilotons of energy.)

Boeing manufactured 744 B-52 Stratofortress bombers, with the final one rolled out at Wichita, Kansas, 22 June 1962. As of June 2016, 75 B-52H bombers remained in service with the United States Air Force.

RB-52B 52-8711 remained in active service until 29 September 1965. Today it is on display at the Strategic Air and Space Museum, Ashland, Nebraska.

A Strategic Air Command alert crew runs to man their bomber, Boeing RB-52B-15-BO Stratofortress 52-8711, 22 Bombardment Wing (Heavy), the first operational B-52, at March Air Force Base, California, 1965. (U.S. Air Force)
A Strategic Air Command alert crew runs to man their bomber, Boeing RB-52B-15-BO Stratofortress 52-8711, 22 Bombardment Wing (Heavy), the first operational B-52, at March Air Force Base, California, 1965. (U.S. Air Force)

© 2023, Bryan R. Swopes

26 June 1948

Convair B-36A-1-CF (S/N 44-92004, the first -A model built) in flight. (U.S. Air Force photo)
Convair B-36A-1-CF 44-92004, the first B-36A built. (U.S. Air Force)

26 June 1948: The 7th Bombardment Wing, Very Heavy, at Carswell Air Force Base, Fort Worth, Texas, received the United States Air Force’s first Consolidated-Vultee Aircraft Corporation (“Convair”) B-36A, a six-engine, very long range heavy bomber. Its mission was to serve as a nuclear-capable deterrent until the Boeing B-52 Stratofortress came into service five years later. A total of 22 B-36As were delivered by February 1949. These were not armed and were used for crew training. Most were later converted by Convair to RB-36E reconnaissance bombers, beginning in 1950.

The B-36A differed from the XB-36 prototype in several areas, but two features were the most apparent: The cockpit had been completely revised and now covered by a large dome. The single-wheel main landing gear was replaced by four-wheel bogies to better spread the airplane’s weight over the runway surface.

A crew of thirteen airmen with their Convair B-36A-10-CF Peacemaker, 44-92014. (LIFE Magazine via Jet Pilot Overseas)
A crew of thirteen airmen with their Convair B-36A-10-CF Peacemaker, 44-92013, at Carswell AFB, 1949. (LIFE Magazine via Jet Pilot Overseas)

The B-36A was 162.1 feet (49.4 meters) long with a wingspan of 230.0 feet (70.1  meters) and overall height of 46.8 feet (14.3 meters). The wings had 2° dihedral, an angle of incidence of 3° and -2° twist. The wings’ leading edges were swept aft to 15° 5′. The airplane’s total wing area was 4,772 square feet (443.33 square meters). Its empty weight was 135,020 pounds (61,244 kilograms). The combat weight was 212,800 pounds (96,524 kilograms) and maximum takeoff weight (MTOW) was 310,380 pounds (140,786 kilograms).

Convair B-36A 44-92015 at Carswell Air Force Base.

The initial production version of the Peacemaker was powered by six air-cooled, supercharged, 4,362.5 cubic-inch-displacement (71.489 liter) Pratt & Whitney Wasp Major R-4360 Pusher (R-4360-25) four-row, 28-cylinder radial engines rated at 2,500 horsepower at 2,550 r.p.m. at 37,000 feet (11,278 meters), and 3,000 horsepower at 2,700 r.p.m. for takeoff. Each engine drove a 19-foot (5.791 meter) three-bladed propeller through a 0.381:1 gear reduction. The R-4360-25 was 9 feet, 1.75 inches (2.788 meters) long and 4 feet, 4.50 inches (1.334 meters) in diameter. It weighed 3,483 pounds (1,580 kilograms).

Convair B-36A 44-92015

The six radial engines gave the bomber a maximum speed of 300 knots (345 miles per hour/556 kilometers per hour) at 31,600 feet (9,632 meters). It took 53 minutes for the giant airplane to climb to an altitude of 20,000 feet (6,396 meters). The service ceiling for the B-36A was 39,100 feet (11,918 meters), and combat ceiling was 35,800 feet (10,912 meters). The ferry range was 9,136 miles (14,702 kilometers).

The B-36As initially carried no defensive armament. The maximum bomb load was seventy-two 1,000 pound bombs (total, 72,000 pounds/32,659 kilograms) carried in four internal bomb bays. With a bomb load of 10,000 pounds (4,536 kilograms), the B-36A had a combat radius of 3,370 nautical miles (3,878 miles/6,241 kilometers).

Designed during World War II when nuclear weapons were unknown to aeronautical engineers, the bomber was designed to carry up to 86,000 pounds (39,009 kilograms) of conventional bombs. It could carry a single 43,600 pound (19,777 kilogram) T-12 Cloudmaker, a conventional explosive earth-penetrating bomb, or, later, several Mk.15 thermonuclear bombs. By combining the bomb bays, one Mk.17 15-megaton thermonuclear bomb could be carried.

The sixteenth B-36A, 44-92020, after conversion to the RB-36E reconnaissance configuration. (U.S. Air Force)
The sixteenth B-36A, 44-92020, after conversion to the RB-36E reconnaissance configuration. (U.S. Air Force)

The RB-36E reconnaissance bomber carried a crew of 22. The radial engines were upgraded to R-4360-41s which increased takeoff horsepower with water injection to 3,500 at 2,700 r.p.m. at Sea Level. Four General Electric J47-GE-19 turbojet engines were added in two two-engine pods at the outer end of each wing. These changes significantly increased the airplane’s maximum speed and altitude capability and reduced the required takeoff distance by 25%. Fourteen reconnaissance cameras were installed. There were four additional radomes on the belly and numerous external antennas for electronic intelligence gathering.

The empty weight of the RB-36E increased to 164,238 pounds (74,497 kilograms) and the maximum takeoff weight to 370,000 pounds (167,829 kilograms).

The maximum speed of the RB-36E was 363 knots (418 miles per hour/672 miles per hour) at 38,200 feet (11,643 meters). Its service ceiling was 46,400 feet (14,143 meters).

The reconnaissance bomber carried eighty 188 pound (85.3 kilogram) T-56 photo flash bombs. Defensive armament consisted of sixteen M24A1 20 mm autocannon in five remotely-operated turrets. 9,200 rounds of ammunition were carried.

Between 1946 and 1954, 384 B-36 Peacemakers were built. They were never used in combat. Only five still exist.

The first Consolidated-Vultee B-36A, 44-92004, was flown to Wright Field, Dayton, Ohio, for structural testing. Redesignated YB-36A, it was tested to destruction.

Convair YB-36 (B-36A) 004 under structural testing at Wright Field. (U.S. Air Force)
Convair YB-36A 44-92004 under structural testing at Wright Field. (U.S. Air Force)

The name, “Peacemaker,” was suggested by a Convair employee. It is a reference to the Colt Model 1873 Single-Action Army® revolver, the classic “six-shooter” of the American frontier, which is also known as the Peacemaker®.

© 2018, Bryan R. Swopes